I have a cobra cb,in a 2011 freightliner cascadica. The red wire goes to red knob, and black to black knob,but what to do with the orange wire? Thanks
Cb install help,please!
Discussion in 'CB Radio Forum' started by Newbeav Newbie, Feb 10, 2012.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Connect the red lead of DC power cord to an accessory 12 volt fuse.
Connect the orange lead to a constant 12v fuse (ie: cigarette lighter or direct to battery)
Connect the black lead to the negative side of the automobile.This is usually the chassis. Any convenient location with good electrical contact (remove paint) may be used.
Mark
Last edited: Feb 10, 2012
-
It came w the fuses for red and orange wires,so the knobs are useless?thanks
-
Just google the OEM website and find a owners manual PDF file.
-
On the end of the fuses should be wiring also. You can connect the red/orange together if needed.
What is the model number of the CB?
MarkLast edited: Feb 10, 2012
-
Mark its a 18wxstII. thanks
-
http://www.cobra.com/downloads/manuals/18WXSTII_MANL1.pdf
Page 3 and 14... same as what I posted above.
Mark
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.