Hey I just bought a Cobra 29lx and the truck I was assigned the other day has all the wires however there is no black or red wire like on the radio, just green and white. Which wires do I connect together?
CB radio
Discussion in 'CB Radio Forum' started by spallaxo, Apr 30, 2020.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Get your voltmeter out and check each one to ground. If neither has 12vdc check the fuse in your panel.
If you hook the CB up reverse polarity it can let the brand new factory smoke out.
And btw, you need to tune the antenna length or the CB will work like crap and eventually die.tscottme Thanks this. -
Use a test light or just hook em up and cross your fingers
-
Candy... Cane...
-
-
-
Once you figure out which one is HOT, connect that wire to the radios RED wire...The radios black wire can just be connected to a grounding screw somewhere under the dash...650cat425 Thanks this. -
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2