You can use a Bird Purch on the hole for the mirror on passenger side of the truck. 4 foot firestick with adjustable tip works best. Run the wire thru the door molding across the top of the windshield using cable clips that stick to the top of the windshield. Then to the center where the CB is. Also a Stryker 447 fits the factory hole too. One note, you need to use 18 foot of cable.
Cb shop?
Discussion in 'CB Radio Forum' started by TruckerPete1990, Sep 1, 2020.
Page 2 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I ran the wires today and put a ground wire. Did my best at Soldering but not sure its right but my CB reads 1.5 with the Stryker 447 under some trees so i think im good.
-
-
Not the best coax, but it is better than stock. It's good enough to get the job done and try to split hairs for something better that you won't even notice a difference, in the real world, in performance.
Some truck stops carry it.
https://www.amazon.com/dp/B001JT5SAS/ref=cm_sw_r_cp_awdb_imm_t1_h1QuFbYH5NBMW -
I'm running double shield coax by astatic. With a browning antenna -
-
Last edited: Sep 19, 2020
-
-
here's a late suggestion...
Chuck's CB Shop in Holiday, TN. I-40, exit 126, go south a mile and he's on the right.
Both Woodchuck and his son know their stuff and will do you right. -
https://driverextreme.com/dx368-kenworth-mount
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 3