Chaining down a load question

kwray · Nov 29, 2009

REDD said: ↑

I am aware & I refuse to get it.
Click to expand...

Just curious.....can you explain why?

RenegadeTrucker · Dec 26, 2009

TripleSix said: ↑

There are some 'tricks', but most of the tricks have to do with your tiedown equipment.

Loaded a combine Friday with 4 other drivers from 4 different companies (TMC, Hunt, Warren, Valley) Each of us used a different method to secure the loads. One driver used j-hooks. One driver removed his hooks from his 3/8 chain and reattached them on the other side of the j-hook bracket. One driver had his chain hooked straight down to a d-ring, around an axle and then pulled foward at the front and rearward at the rear.
I have 6 ft sections of 3/8 chain with a grab hook on one end and machine hooks on the other. I hooked the machine hooks into the j-hook brackets and hooked the ratchet binder to the sides of the lowboy (2 in the front, 2 rear. Then I used four 2ft 3/8 shortchains and hooked the axles.
Strapped down the tires, hung the flags and banners and I was ready to go.

I guess the main trick would be how you run straps through the winch and secure the ends.
Click to expand...

Call me crazy, but I always put 2 1/2" chains on the back of anything big like that to prevent it coming forward in the event of a sudden stop. Id hook em to the strongest point I could find and suck all of the slack out of em.

REDD · Dec 26, 2009

kwray said: ↑

Just curious.....can you explain why?
Click to expand...

Because it is nothing but a money scam!

Below are 2 quotes of mine from a different thread that we spoke about this.

REDD said: ↑

I still as of today don't have any coil certifications.... NY or AL.... I don't feel the experienced driver's who know the dangers & how to properly secure a coil needs one.... So I refuse to get one & they refuse to load me a coil.... Oh well.... No sweat lost off my sack.
Click to expand...

REDD said: ↑

It is only good for loading/unloading coils in the state of Alabama. This includes skidded coils that are being loaded/unloaded in Alabama. If you load coils in other states & are just traveling thru the state of Alabama, then the coil certification is not needed.

Sounds like a bunch of crap to me... If the certification is required for loading/unloading in Alabama... Then why does a person just traveling thru get by without it? A coil is a coil is a coil.... They can do the same damage whether they fall off a local truck (which Alabama is known for & as to why they have this new law) or fall of a truck that is just traveling thru....
Click to expand...

notarps4me · Dec 26, 2009

RickG said: ↑

This might help . http://www.fmcsa.dot.gov/rules-regulations/truck/vehicle/cs-policy.htm . But if you don't have experience and get hired you will likely go through a training period .
Click to expand...

Or more than likely we will see it or read about it..........

Log in or Sign up

Forums

Chaining down a load question

kwray Medium Load Member

Trucking Jobs in 30 seconds

Wait, employers can't reach you!

RenegadeTrucker Road Train Member

REDD The Legend

notarps4me Road Train Member

Trucking Jobs in 30 seconds

Wait, employers can't reach you!

Log in or Sign up

Useful Searches

Chaining down a load question

kwray Medium Load Member

Wait, employers can't reach you!

RenegadeTrucker Road Train Member

REDD The Legend

notarps4me Road Train Member

Wait, employers can't reach you!