Charge Air hoses?

Discussion in 'Ask An Owner Operator' started by Hanadarko, Mar 25, 2012.

  1. Mar 25, 2012 #1
    Hanadarko

    Hanadarko Independent Owner/Operator

    2,971
    935
    Oct 1, 2009
    Midwest
    0
    Anyone got a good source for decent charge air hoses (aka Hump Boots) ?
    I'd like to replace mine when I swap out the CAC this week.

    4" round by 6" long..

    -JD
     
    Hanadarko, Mar 25, 2012
    Hanadarko, Mar 25, 2012
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Mar 25, 2012 #2
    leftlanetruckin

    leftlanetruckin Road Train Member

    3,607
    3,163
    Mar 12, 2009
    Mo Via Blackpool,Lancs.
    0
    I have always just got them from the dealer (The blue silicone ones?).
    Not expensive enough to justify the time needed to find an alternative IMHO.
    Good news is, they are all but universal. So if you run a KW/Pete, you can get them cheaper at a Freightliner dealer most of the time for less than what KW or Pete dealers want for them.

    Martin
     
    leftlanetruckin, Mar 25, 2012
    leftlanetruckin, Mar 25, 2012
    #2
    Hanadarko Thanks this.
  4. Mar 25, 2012 #3
    Hanadarko

    Hanadarko Independent Owner/Operator

    2,971
    935
    Oct 1, 2009
    Midwest
    0
    I'll check the FreightShaker dealer monday...good idea :biggrin_25514:
     
    Hanadarko, Mar 25, 2012
    Hanadarko, Mar 25, 2012
    #3
  5. Mar 25, 2012 #4
    rollin coal

    rollin coal Road Train Member

    13,704
    28,206
    Mar 29, 2008
    TN
    0
    Replace all the clamps with new while you're at it.
     
    rollin coal, Mar 25, 2012
    rollin coal, Mar 25, 2012
    #4
  7. Mar 25, 2012 #5
    Hanadarko

    Hanadarko Independent Owner/Operator

    2,971
    935
    Oct 1, 2009
    Midwest
    0
    Got them...thanks. :biggrin_255:
     
    Hanadarko, Mar 25, 2012
    Hanadarko, Mar 25, 2012
    #5
  8. Mar 25, 2012 #6
    barroll

    barroll Road Train Member

    1,096
    544
    Nov 23, 2010
    Southwest Michigan
    0
    Coat the screw threads with anti-sieze before you put them on if you got the screw type.

    Put some between the mating surfaces if you have the spring type.
     
    barroll, Mar 25, 2012
    barroll, Mar 25, 2012
    #6
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.