Check out this new antenna I found !

The antenna is fine but the led on trans is a bit limp wristed..
Seen some fellas do the 4 or 5 foot fibreglass ant all lit up..

 

Whats my ant have to do with the sirio led lighting up on trans??
I daid the ant is fine but the led deal is limp wristed..I also saw a mod that people have done to light up the fibreglass antenna...
Just search led lights on a cb antenna in youtube..

 

Saw that antenna back a month ago on the sirio site i think..Saw it when i was looking for my sirio 5000 mag mount for my hemi..

 

I'm interested in this antenna myself Sirio 5000. Did some research on it and most who ran the Wilson 1000 switch to the sirio 5000. But most where magnet mount so the ground plane would exceed performance. I'm running a Wilson 2000 with 18" shaft on a 94 pete. I hate to invest on a sirio 5000 and to find out it does no better than my Wilson 2k. The reviews I read where a plus on magnets roof mounts, I can't find a descent review for it for a "truck mirror mount" type.

 

I'm interested already

 

I would guess they use some type of ferrite beads to knock out the noise many LED lights emit. Some guys who run a lot of aftermarket LED's I can hear on the cb 1/4 mile before they get to me and a 1/4 mile after.

 

See it is simple, many of these lights have super cheap drivers in them, so they make a lot of noise. The LEDs themselves don't, they can work on DC or in many cases high frequency AC to drive them.