I have a Cobra 29ltd Classic. It will turn on, settings are good. I can't reach or receive. I've tried keying the mic and calibrating in various channels. The calibration lever won't swing at all, and neither will the SWR. When it is in RF mode, it shows a low signal when it should be higher. I've tried with the same model radio and the current setup, and it works great, but mine won't work. Antenna and coax are good.
Cobra 29ltd Classic has some issues...
Discussion in 'CB Radio Forum' started by Kado, Feb 19, 2018.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
handlebar Thanks this.
-
-
-
someone let the smoke out. Sounds like finals are kabloooie.
-
Cobra radios have to have the Mic plugged in to work...If the Mic is bad it could cause radio not to operate correctly. -
Bad ground on antenna. Although it could be the PILL or mosfet?
YouTube it
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.