Hey Everyone,
My 2011 Freightliner m2 with a cummins isc 8.3 recently threw code 3232. Basically issue with power to inlet nox sensor (mounts behind the turbo). The diagram on quickserve shows 2 10amp fuses that power the inlet and outlet nox sensors. Does anyone have any idea where these fuses are? I have attached the diagram from quickserve (fuses are the very bottom of the image in the middle).
Ive checked the fuse boxes under the hood and behind the cab and around the batteries. I know the relay is part of the nox sensor unit and cannot be purchased separately. Thank you!
Code 3232
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Kawi027, Jan 12, 2021.
-
Attached Files:
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Update * I had a mechanic check the power to the sensor and all showed fine. I replaced the sensor yesterday and code still remains. Any help is appreciated. Thank you
-
Cummins part? Double check sensor part number as inlet and outlet will plug in electrically. Load test the power and ground with a sealed beam headlight. You may have good voltage but no amperage.
-
Goodysnap Thanks this.
-
I do not have access to FL wiring and I am not super familiar with that chassis. Sorry
Kawi027 Thanks this. -
-
-
I was wondering, did you ever find the relay and fuses? I'm have the exact same issue now.
-
Whoops! Newbie mistake and didn't get my reply on this one.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.