Comfort Pro Apu Issues (solved)

Discussion in 'Trucks [ Eighteen Wheelers ]' started by mitchtazz, Apr 12, 2014.

  1. bzinger

    bzinger Road Train Member

    13,115
    43,395
    Dec 10, 2014
    omaha , ne
    0
    I know theres places that rebuild them but from what I've heard they dont last long .
    I know new ones are a about 1000.00.
    Depending on where you are and run I'd go to the apu center in strafford mo...google it .
    I recently had them work on my carrier for an electrical issue nobody else could fix .
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Antinomian

    Antinomian Road Train Member

    1,453
    1,923
    Feb 17, 2013
    0
    Actually they are $1600 at a Carrier dealer. They are heavy too. I had to go buy a low profile floor jack at Harbor Freight.

    Somebody posted a rebuild kit on this forum once. Had I known one existed I would have tried to rebuild mine first before replacing it.
     
    bzinger Thanks this.
  4. bzinger

    bzinger Road Train Member

    13,115
    43,395
    Dec 10, 2014
    omaha , ne
    0
    Dam they are proud of them !
     
  5. Bomax111

    Bomax111 Bobtail Member

    5
    1
    Feb 19, 2020
    0
    If someone knows what rebuilding kit and where to buy it plz post website or links, it will help a lot!
     
  6. Rom

    Rom Bobtail Member

    16
    7
    Jun 22, 2015
    0
    See if you can move the pulley up and down to see if bearings are bad. Never found anyone that could SUCCESSFULLY rebuild one of these. Usually best to buy a new one, $1500-$1600.
     
    bzinger Thanks this.
  7. Bomax111

    Bomax111 Bobtail Member

    5
    1
    Feb 19, 2020
    0
    yes , it moves freely, and works fine, but only makes a lot of noises.
     
  8. Bomax111

    Bomax111 Bobtail Member

    5
    1
    Feb 19, 2020
    0
    If anyone removed this thing, what manufacturer is it? Or someone have a picture of sticker? Thanks.
     
  9. Antinomian

    Antinomian Road Train Member

    1,453
    1,923
    Feb 17, 2013
    0
    I have a parts list for the PC6000 if that helps.
     

    Attached Files:

  10. Dtruckin

    Dtruckin Bobtail Member

    2
    0
    Mar 10, 2020
    0
    I have a comfortpro apu 6022. I have power at the motor but no power at the driver control panel does anyone have any ideals what could cause it
     
  11. Dtruckin

    Dtruckin Bobtail Member

    2
    0
    Mar 10, 2020
    0
    Did you get yours fixed? I'm having the same problem out of my comfort pro 6022 and I can't figure it out. My fuse is good
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  • Draft saved Draft deleted