Cummins ISx oh

Discussion in 'Trucks [ Eighteen Wheelers ]' started by Highwolf89, Jul 19, 2015.

Page 1 of 2
  1. Jul 19, 2015 #1
    Highwolf89

    Highwolf89 Light Load Member

    294
    61
    Jul 30, 2013
    0
    about how many miles does the cummins ISx go before needing a oh I know it varies but what is Verage with these new engines...

    Thanks
     
    Highwolf89, Jul 19, 2015
    Highwolf89, Jul 19, 2015
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jul 19, 2015 #2
    KeithT1967

    KeithT1967 Road Train Member

    1,458
    1,542
    Nov 12, 2008
    Springfield, Ohio
    0
    Cummins recommends every 150k miles
     
    KeithT1967, Jul 19, 2015
    KeithT1967, Jul 19, 2015
    #2
  4. Jul 19, 2015 #3
    taxihacker66

    taxihacker66 Road Train Member

    1,354
    1,287
    Feb 26, 2012
    Concrete jungle.
    0
    Usually 800 to 1 million miles is what I've seen. if it was used in heavy haul some where around 500k. Mine I did at 900k.
     
    taxihacker66, Jul 19, 2015
    taxihacker66, Jul 19, 2015
    #3
  5. Jul 19, 2015 #4
    Bakerman

    Bakerman Road Train Member

    4,663
    8,812
    Jan 27, 2013
    Phoenix, AZ
    0
    Friend of mine has his in the shop for rebuild, made it to 1m.
     
    Bakerman, Jul 19, 2015
    Bakerman, Jul 19, 2015
    #4
  7. Jul 19, 2015 #5
    average joe

    average joe Medium Load Member

    432
    274
    Jan 11, 2009
    0
    Overhaul or overhead?
     
    average joe, Jul 19, 2015
    average joe, Jul 19, 2015
    #5
  8. Jul 19, 2015 #6
    Highwolf89

    Highwolf89 Light Load Member

    294
    61
    Jul 30, 2013
    0
    Over haul
     
    Highwolf89, Jul 19, 2015
    Highwolf89, Jul 19, 2015
    #6
  9. Jul 19, 2015 #7
    Highwolf89

    Highwolf89 Light Load Member

    294
    61
    Jul 30, 2013
    0
    Yah I am looking at a truck with 600k miles 600 hp he said he pulled heavy so just wondering how much I will get out of her if I was to buy
     
    Highwolf89, Jul 19, 2015
    Highwolf89, Jul 19, 2015
    #7
  10. Jul 19, 2015 #8
    taxihacker66

    taxihacker66 Road Train Member

    1,354
    1,287
    Feb 26, 2012
    Concrete jungle.
    0
    How heavy is heavy 3 axle 4 axle b trains or ?
     
    taxihacker66, Jul 19, 2015
    taxihacker66, Jul 19, 2015
    #8
  11. Jul 19, 2015 #9
    cnsper

    cnsper Road Train Member

    5,869
    27,421
    Feb 28, 2014
    0
    Heck, I had a Prime driver tell me they were loaded heavy, 80,000 pounds...:eek:
     
    cnsper, Jul 19, 2015
    cnsper, Jul 19, 2015
    #9
  12. Jul 19, 2015 #10
    KeithT1967

    KeithT1967 Road Train Member

    1,458
    1,542
    Nov 12, 2008
    Springfield, Ohio
    0
    Sorry, I thought you meant overhead adjustment. If you're buying a 600k mile ISX get it on a dyno first and get the blowby numbers, if it checks out good put new bearings in it, ISX's tend to show extreme bearing wear around 600k, going longer will start to damage the crank.
     
    KeithT1967, Jul 19, 2015
    KeithT1967, Jul 19, 2015
    #10
    blairandgretchen Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 1 of 2