Diagnostic Equipment

Jpro software currently version is 2023 V1.2

Whats coverage for Jpro latest software ? Which functions did it support ?
Lets check the instructions as following :
JPRO Heavy-Duty Features:
Engine Support
HEAVY-DUTY SUPPORT FOR

ClearFlame
Supports the ability to identify ClearFlame components.
HEAVY-DUTY SUPPORT FOR

Cummins
Data monitor now displays proprietary data for EPA02 CM800.
Data monitor now displays spark plug voltage data for CNG CM2380A.
Bi-Directional support for Cummins engines:
NOTE: JPRO must connect and identify the correct Cummins engine module software versions to enable bi-directional support.
Aftertreatment History now supports EPA 10: all ISB, ISC, ISL, and ISX | EPA 13: all ISB, ISL, and ISX | GHG17: all B6.7, L9, and X15 | GHG21: all B6.7, LP, and X15
Cylinder Cut-Out Test now supports EPA 02: ISB (3.9L)
Maintenance Monitor Parameters now supports EPA 10: all ISB, ISC, ISL, and ISX | EPA 13: all ISB, ISL, and ISX | GHG17: all B6.7, LP, and X15 | CNG: all ISL, ISX, and ISB

NOTE: To see Software Version, select the engine and look in the bottom left of JPRO.
HEAVY-DUTY SUPPORT FOR

Deutz
Supports reading proprietary sensor data on Deutz engines:
EMR 3 – EDC 16 UC40 on TBL-180, Safeaero 220, and Tug MT
EMR 3 – EDC 7 UC31 on TBL-180, Safeaero 220, and Tug MT
EMR 4 – EDC 17 CV52 on TBL-180, TBL-400, Safeaero 220, Tug 660, Tug GT-35, Tug M1A, Tug MA, Tug MH, and Tug M
EMR 4 – EDC 17 CV54 on TBL-180, Tug GT-35, Tug MH, and Tug MR
EMR4 – EDC 17 CV56 on Safeaero 220

NOTE: Deutz 12-pin Off-Highway cables are required.
HEAVY-DUTY SUPPORT FOR

EControls
Supports reading SAE faults and sensor data on EControls engines:
EControls ECM on Tug 660, Tug M1A, and Tug MA

EControls ECM 4G on Tug 660, Tug Alpha, Tug M1A, and Tug MA

NOTE: EControls 8-pin Off-Highway cables are required.
HEAVY-DUTY SUPPORT FOR

Paccar
Addressed communication issues when connecting to PACCAR vehicles 2022 and newer.

Brake Support
Bendix Tractor Brakes
Updated Intellipark Systems support for latest firmware versions.

Bendix Driver Assistance Systems (DAS)
Updated Active Steering by Bendix CVS support for newer ECU models.

Bendix Tire Pressure Monitoring System (TPMS)
Bi-Directional support for Bendix TPMS:
TPMS Ambient Sensor Configuration now supports Ambient Application Configuration
Ambient Pressure Source

JPRO Off-Highway Features
Bobcat
Supports reading proprietary diagnostic fault codes, event codes, and data for the following equipment types, models, and engines:

Excavators
E45, E50, and E55 with DL02 engine
Compact Track Loaders
T450, T550, T590, and T650 with DL02 engine
T630, T740, T770, and T870 with DL03 engine

Skid Steer Loaders
S530, S630, and S650 with DL02 engine
S740 and S770 with DL02 engine

NOTE: Bobcat 6-pin Off-Highway cables are required.
OFF-HIGHWAY SUPPORT FOR

Caterpillar
Supports reading proprietary diagnostic fault codes, event codes, and data for the following equipment types, models, and engines:

Backhoe Loaders
Model 416, Model 420, and Model 420 XE with C3.6 engine
Compact Track Loaders
Model 420 XE with C3.6 engine
T630, T740, T770, and T870 with DL03 engine

Dozers
D4 with C4.4 engine
D5 with C7.1 engine
D6 and D6 XE with C9.3B engine
D8 with C15 engine

Excavators
315 and 315 GC with C3.6 engine
320 GC, 320 T4f/EU, and 323 T4f/EU with C4.4 engine
336 GC with C7.1 engine
349 with C13 engine

Wheel Loaders
926M, 930M, 930, Ag Handler, 930M Waste Handler, 938M, 950 GC, and 950M with C7.1 engine
966M with C9.3 engine
966. 966 GC, 966 XE, and 966M XE with C9.3B engine
980 with C13 engine

John Deere
Supports SAE faults and sensor data for the following equipment types, models, and engines:
Backhoes
310L, 310SL, 310SL HL, and 410L with John Deere 6068 engine
310L EP with Yanmar 4TNV engine

Dozers
450K, 450K LGP, 650K, and 650K LGP with John Deere 4045 engine
700L XLT, 700L LGP, 750L, 750L XLT, and 750L LGP with John Deere 6068 engine

Compact Loaders
317G, 325G, 331G, and 333G with Yanmar 4TNV engine

Excavators
35G and 30G with Yanmar 3TNV engine

50G, 75G, 60G, and 85G with Yanmar 4TNV engine

130G, 160G LC, and 200G with John Deere 4.5L engine

210G LC with John Deere 6.8L 6068HT106 engine

250G LC with John Deere 6.8 L engine

350 P-Tier with John Deere 9.0 L engine
470 P-Tier with John Deere 6135 engine
Skid Steer Loaders

317G, 318G, 320G, and 330G with Yanmar 4TNV engine

Wheel Loaders

524P, 544 P-Tier, 624 P-Tier, and 644P with John Deere 6.8 L engine

844 P-Tier with John Deere 6135 engine

Komatsu
Supports reading proprietary diagnostic fault codes, event codes, and data for the following equipment types, models, and engines:
Excavators
PC88MR-10 with SAA4D95LE-6 engine
PC138USLC-11 with SAA4D95LE-7 engine
PC-200-LC-8 with SAA6D107E-1 engine
PC210LC-11 with SAA6D107E-3 engine
PC290LC-11 with SAA6D107E-3 engine
PC360LC-10 with SAA6D114E-5 engine
PC360LC-11 with SAA6D114E-6 engine
PC490LC-11 with SAA6D125E-7 engine

Wheel Loaders
WA270-7, WA320-7, WA380-7 with SAA6D107E-2 engine
WA270-8, WA320-8, WA380-8 with SAA6D107E-3 engine

JPRO Medium-Duty Features
Aftertreatment Diagnostics displays data from aftertreatment related components, including Soot Level, and EGR data for rapid troubleshooting of the aftertreatment system.

Ability to view the following subsystems with related data:
DEF Tank and Pump
DPF and DOC
Engine, EGR, and Turbocharger
SCR

Search the Data tab to quickly identify parameters of interest.
Aftertreatment Diagnostics supports the following Medium-Duty manufacturers:
Ford
GM
Hino
Isuzu

 

Jpro software currently version is 2023 V1.2
Whats coverage for Jpro latest software ? Which functions did it support ?
Lets check the instructions as following :
JPRO Heavy-Duty Features:
Engine Support
HEAVY-DUTY SUPPORT FOR

ClearFlame
Supports the ability to identify ClearFlame components.
HEAVY-DUTY SUPPORT FOR

Cummins
Data monitor now displays proprietary data for EPA02 CM800.
Data monitor now displays spark plug voltage data for CNG CM2380A.
Bi-Directional support for Cummins engines:
NOTE: JPRO must connect and identify the correct Cummins engine module software versions to enable bi-directional support.
Aftertreatment History now supports EPA 10: all ISB, ISC, ISL, and ISX | EPA 13: all ISB, ISL, and ISX | GHG17: all B6.7, L9, and X15 | GHG21: all B6.7, LP, and X15
Cylinder Cut-Out Test now supports EPA 02: ISB (3.9L)
Maintenance Monitor Parameters now supports EPA 10: all ISB, ISC, ISL, and ISX | EPA 13: all ISB, ISL, and ISX | GHG17: all B6.7, LP, and X15 | CNG: all ISL, ISX, and ISB

NOTE: To see Software Version, select the engine and look in the bottom left of JPRO.
HEAVY-DUTY SUPPORT FOR

Deutz
Supports reading proprietary sensor data on Deutz engines:
EMR 3 – EDC 16 UC40 on TBL-180, Safeaero 220, and Tug MT
EMR 3 – EDC 7 UC31 on TBL-180, Safeaero 220, and Tug MT
EMR 4 – EDC 17 CV52 on TBL-180, TBL-400, Safeaero 220, Tug 660, Tug GT-35, Tug M1A, Tug MA, Tug MH, and Tug M
EMR 4 – EDC 17 CV54 on TBL-180, Tug GT-35, Tug MH, and Tug MR
EMR4 – EDC 17 CV56 on Safeaero 220

NOTE: Deutz 12-pin Off-Highway cables are required.
HEAVY-DUTY SUPPORT FOR

EControls
Supports reading SAE faults and sensor data on EControls engines:
EControls ECM on Tug 660, Tug M1A, and Tug MA

EControls ECM 4G on Tug 660, Tug Alpha, Tug M1A, and Tug MA

NOTE: EControls 8-pin Off-Highway cables are required.
HEAVY-DUTY SUPPORT FOR

Paccar
Addressed communication issues when connecting to PACCAR vehicles 2022 and newer.

Brake Support
Bendix Tractor Brakes
Updated Intellipark Systems support for latest firmware versions.

Bendix Driver Assistance Systems (DAS)
Updated Active Steering by Bendix CVS support for newer ECU models.

Bendix Tire Pressure Monitoring System (TPMS)
Bi-Directional support for Bendix TPMS:
TPMS Ambient Sensor Configuration now supports Ambient Application Configuration
Ambient Pressure Source

JPRO Off-Highway Features
Bobcat
Supports reading proprietary diagnostic fault codes, event codes, and data for the following equipment types, models, and engines:

Excavators
E45, E50, and E55 with DL02 engine
Compact Track Loaders
T450, T550, T590, and T650 with DL02 engine
T630, T740, T770, and T870 with DL03 engine

Skid Steer Loaders
S530, S630, and S650 with DL02 engine
S740 and S770 with DL02 engine

NOTE: Bobcat 6-pin Off-Highway cables are required.
OFF-HIGHWAY SUPPORT FOR

Caterpillar
Supports reading proprietary diagnostic fault codes, event codes, and data for the following equipment types, models, and engines:

Backhoe Loaders
Model 416, Model 420, and Model 420 XE with C3.6 engine
Compact Track Loaders
Model 420 XE with C3.6 engine
T630, T740, T770, and T870 with DL03 engine

Dozers
D4 with C4.4 engine
D5 with C7.1 engine
D6 and D6 XE with C9.3B engine
D8 with C15 engine

Excavators
315 and 315 GC with C3.6 engine
320 GC, 320 T4f/EU, and 323 T4f/EU with C4.4 engine
336 GC with C7.1 engine
349 with C13 engine

Wheel Loaders
926M, 930M, 930, Ag Handler, 930M Waste Handler, 938M, 950 GC, and 950M with C7.1 engine
966M with C9.3 engine
966. 966 GC, 966 XE, and 966M XE with C9.3B engine
980 with C13 engine

John Deere
Supports SAE faults and sensor data for the following equipment types, models, and engines:
Backhoes
310L, 310SL, 310SL HL, and 410L with John Deere 6068 engine
310L EP with Yanmar 4TNV engine

Dozers
450K, 450K LGP, 650K, and 650K LGP with John Deere 4045 engine
700L XLT, 700L LGP, 750L, 750L XLT, and 750L LGP with John Deere 6068 engine

Compact Loaders
317G, 325G, 331G, and 333G with Yanmar 4TNV engine

Excavators
35G and 30G with Yanmar 3TNV engine

50G, 75G, 60G, and 85G with Yanmar 4TNV engine

130G, 160G LC, and 200G with John Deere 4.5L engine

210G LC with John Deere 6.8L 6068HT106 engine

250G LC with John Deere 6.8 L engine

350 P-Tier with John Deere 9.0 L engine
470 P-Tier with John Deere 6135 engine
Skid Steer Loaders

317G, 318G, 320G, and 330G with Yanmar 4TNV engine

Wheel Loaders

524P, 544 P-Tier, 624 P-Tier, and 644P with John Deere 6.8 L engine

844 P-Tier with John Deere 6135 engine

Komatsu
Supports reading proprietary diagnostic fault codes, event codes, and data for the following equipment types, models, and engines:
Excavators
PC88MR-10 with SAA4D95LE-6 engine
PC138USLC-11 with SAA4D95LE-7 engine
PC-200-LC-8 with SAA6D107E-1 engine
PC210LC-11 with SAA6D107E-3 engine
PC290LC-11 with SAA6D107E-3 engine
PC360LC-10 with SAA6D114E-5 engine
PC360LC-11 with SAA6D114E-6 engine
PC490LC-11 with SAA6D125E-7 engine

Wheel Loaders
WA270-7, WA320-7, WA380-7 with SAA6D107E-2 engine
WA270-8, WA320-8, WA380-8 with SAA6D107E-3 engine

JPRO Medium-Duty Features
Aftertreatment Diagnostics displays data from aftertreatment related components, including Soot Level, and EGR data for rapid troubleshooting of the aftertreatment system.

Ability to view the following subsystems with related data:
DEF Tank and Pump
DPF and DOC
Engine, EGR, and Turbocharger
SCR

Search the Data tab to quickly identify parameters of interest.
Aftertreatment Diagnostics supports the following Medium-Duty manufacturers:
Ford
GM
Hino
Isuzu

 

The Noregon JPRO diagnostics software is highly regarded in the diagnostic tool industry. It is known for its ability to handle several different makes of trucks and engines, making it a versatile choice for those in the commercial vehicle industry.

One of the key features of the Noregon JPRO diagnostics is its extensive coverage of various truck makes and engine types. This ensures that users can effectively diagnose and troubleshoot a wide range of vehicles, regardless of their brand or engine specifications.

Users have praised the user-friendly interface and intuitive design of the software. It is known for its ease of use and comprehensive diagnostic capabilities. The software provides detailed information and easy-to-understand reports, making it a valuable tool for mechanics and technicians.

Another advantage of the Noregon JPRO diagnostics is its frequent updates and ongoing support. Keeping up with the latest truck and engine technologies can be challenging, but Noregon constantly updates its software to ensure compatibility with new models and systems. Their customer support team is also highly responsive and knowledgeable, assisting users in resolving any issues they may encounter.

Overall, the Noregon JPRO diagnostics is a reliable and efficient tool for handling diagnostics across multiple makes of trucks and engines. Its extensive coverage, user-friendly interface, and ongoing support make it a popular choice among professionals in the industry.