Took my batteries out to clean and check water. Made myself a sketch of the cables and wire hookups. I forgot one wire on the sketch. It is a white wire that changes to 4 white wires up inside the harness. It goes to the ecm . If you were holding ecm in your hands looking at it head on the connector would be in the top right corner. I am pretty sure it goes to negative. I did a bunch of searching on line but didn't find anything to make me 100% sure.
1996 series 60 Detroit Diesel 370/430hp
Truck build date is November of 1995
Pretty sure its a DDEC3
9200 IH
I posted this on the O/O site to. I gotta get it going for the morning.
Thanks Mike
ECM Question Series 60
Discussion in 'International Forum' started by 9200 IH, Jul 5, 2018.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
On the connector there should be 5 wires. (2) red (3) black. The 3 black (ground) all in a row top to bottom. The 2 red (battery) in row top to bottom of connector. Hope that makes sense.
9200 IH Thanks this. -
Yes it does make sense. Only difference my grounds were white. Got it running.
Thank you very much -
Yes, they are ground. International ground wires are white.
Accidental Trucker and 9200 IH Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.