Electrical fault

Discussion in 'International Forum' started by Tulile419, Jul 19, 2018.

  1. Tulile419

    Tulile419 Bobtail Member

    3
    0
    Jul 19, 2018
    0
    I have a 2010 Pro star with a ISX the truck every about 9000 miles will give me electrical fault and all my gauges on the right side of the dash will come off when i plug the ecu to get a diagnostic will give low oil preasure sensor in which i have change 2 times already but when i change all the filters it will go away for another 8 to 9000 miles. Ty
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Heavyd

    Heavyd Road Train Member

    7,625
    6,023
    Feb 4, 2009
    0
    Ok, you have more than one problem here. If you are getting low oil pressure, which is corrected by changing oil, then that is a mechanical problem with the engine that needs to be looked at. The electrical fault is usually a communication problem between electronic modules. I recommend getting the truck scanned with Diamond Logic Builder software and Cummins Insite to see what codes are getting logged.
     
    blairandgretchen Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.