engine ecu code (fuel drive stage) electrical

Discussion in 'Volvo Forum' started by pizaboy, Oct 27, 2011.

Page 1 of 2
  1. Oct 27, 2011 #1
    pizaboy

    pizaboy Bobtail Member

    2
    0
    Sep 28, 2008
    Dalmatia, Pa.
    0
    I bought a 2005 volvo truck a month ago. A couple of days after I bought it I got a check engine ecu code ("fuel drive stage electrical").
    Then while driving it, loaded pretty heavy going up a steep grade I lost all power had to crawl up to the crest of the grade.
    took it to volvo they said it need O rings on the injectors...Called the dealer where I bought it he told me to take it to the garage he deals with. They put the O rings on. When I went to pick it up it ran worse then when I took it there. So then they said it needed a fuel pump so they put one on. Then they said it had a cracked injector...put one of those in. Still getting same error message, truck still has issues going up hills loaded. Wondering if anyone has had similar problems..any feed back would be greatly appreciated
     
    pizaboy, Oct 27, 2011
    pizaboy, Oct 27, 2011
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Oct 27, 2011 #2
    Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    what engine? D12 ore D13B?
     
    Pablo-UA, Oct 27, 2011
    Pablo-UA, Oct 27, 2011
    #2
    KB3MMX Thanks this.
  4. Oct 29, 2011 #3
    pizaboy

    pizaboy Bobtail Member

    2
    0
    Sep 28, 2008
    Dalmatia, Pa.
    0
    D12 Took it to volvo yesterday replaced lift pump, while there an injector went bad...replaced that,changed both the fuel filters...drove it home still getting the same error codes:biggrin_25521:
     
    pizaboy, Oct 29, 2011
    pizaboy, Oct 29, 2011
    #3
  5. Oct 29, 2011 #4
    Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    can you post me full code like MID 128 SID-PID FMI?
     
    Pablo-UA, Oct 29, 2011
    Pablo-UA, Oct 29, 2011
    #4
    KB3MMX Thanks this.
  7. Feb 2, 2013 #5
    DINO MOSTAR

    DINO MOSTAR Bobtail Member

    8
    0
    Feb 2, 2013
    0
    I have the same problem with my truck.I'am wondering if you have fixed your problem? D12 engine 2004.Thank you
     
    DINO MOSTAR, Feb 2, 2013
    DINO MOSTAR, Feb 2, 2013
    #5
  8. Feb 2, 2013 #6
    DINO MOSTAR

    DINO MOSTAR Bobtail Member

    8
    0
    Feb 2, 2013
    0
    Hello,I'am new guest on this forum.I need help! I got 2004 Volvo engine D12 automatic transmision 465 hp.I lost power,so my truck does not have too much power,especially the heavy loads.The codes that I got are Mid 128,Sid 211,Fmi 4.....Mid 128,Sid 78,Fmi 5 and on the dashboard it says"fuel feed pump driver stage electrical problem". For the past four months I have changed turbo,both egr valves,I changed the air cooler,adjusted valves and injectors.I keep up with my truck very well,truck is idoling smoothly.Right now my Mpg is 5.0.My driver says that sometimes while he is driving it pops out of gear for 2 seconds and and then back to gear by itself(in that moment the Rpm goes high) even thou if it is in the 10th gear it feels like it needs a higher gear.I have changed the shifter like 3-4 months ago,my mechanic changed the alternator,new batteries and checked all harnests.These codes I found on the forums and what they mean.If i'am not mistaken it is fuel pressure sensor,I doubt it's because of that.
     
    DINO MOSTAR, Feb 2, 2013
    DINO MOSTAR, Feb 2, 2013
    #6
  9. Feb 3, 2013 #7
    Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    bad wiring, sensor supply 5V is short to ground and all sensoors are not supplied and engine loose power
     
    Pablo-UA, Feb 3, 2013
    Pablo-UA, Feb 3, 2013
    #7
    KB3MMX Thanks this.
  10. Feb 3, 2013 #8
    DINO MOSTAR

    DINO MOSTAR Bobtail Member

    8
    0
    Feb 2, 2013
    0
    So what is my next step.....what is the sensor supply 5V........more details...please.......thank you
     
    DINO MOSTAR, Feb 3, 2013
    DINO MOSTAR, Feb 3, 2013
    #8
  11. Feb 3, 2013 #9
    Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    all sensors are +5V supplied. If one is short ore bad wiring no sensors read data
     
    Pablo-UA, Feb 3, 2013
    Pablo-UA, Feb 3, 2013
    #9
    KB3MMX Thanks this.
  12. Feb 3, 2013 #10
    DINO MOSTAR

    DINO MOSTAR Bobtail Member

    8
    0
    Feb 2, 2013
    0
    The way I see it,Pablo you are a doctor for the trucks.My mechanic checked all the wireing he did not find anything suspisious.How do I know which sensor is bad?Thank you
     
    DINO MOSTAR, Feb 3, 2013
    DINO MOSTAR, Feb 3, 2013
    #10
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 1 of 2