engine fan switch

Discussion in 'Volvo Forum' started by chris childs, May 11, 2013.

  1. VolvoTech0816

    VolvoTech0816 Bobtail Member

    39
    8
    Aug 4, 2013
    0
    the engine harness has the plug for that option, if you need the extra cool down on the engine while you want to stay cool in your truck go ahead, you may or may not like it.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. KB3MMX

    KB3MMX Road Train Member

    3,075
    2,596
    Dec 29, 2014
    Orrstown, PA
    0
    Can you help with the location of that plug?
    Thank you!!
     
  4. benrab

    benrab Medium Load Member

    326
    238
    Apr 5, 2015
    Quebec ,Canada
    0
    Hi, the way to install a manual fan switch on ON-OFF air fan clutch on Volvo Engine that i know is :
    Install a switch (Normally Open style) feed by a fuse (5 amps is enough) and 12 volts from ignition or accessories circuit, send the outpout of the switch to the VECU (under the tech tray where the fuses are located) at the position PA 19 of the big green connector of the VECU you will need a special Volvo terminal P/N 3948725 and that's it.
    No parameter need to be program.
    Note: It's possible when you will turn OFF the fan clutch with the manual fan switch a 30 seconds delay take place (fan stay ON) because often that parameter is already factory set.
    Note: The engine should run to engage the fan, at no engine RPM it doesn't work.
    Keep me in touch please.
    Ben
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.