Flatbed & Equipment

Discussion in 'Questions From New Drivers' started by Flying Dutchman, Apr 25, 2011.

  1. Flying Dutchman

    Flying Dutchman Road Train Member

    1,274
    522
    Nov 2, 2009
    Northern California
    0
    It was a local thing, not big deal just from Sacramento to Oakdale, CA. Just wondering what the actual law was. It was a New Holland LV80 bucket loader, and I didn't do any extra chaining than what I mentioned above. I figured once I was out of Sac it was happy trails from there. Thanks for clearing it up for me.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. passingthru69

    passingthru69 Road Train Member

    Each state will have various rules.
    The state of Il. states in their provision sheet the booms and buckets also must be chain as well.
    Even though it is attached to the main unit.
    They have had booms move and buckets come unhooked some how I guess.
     
  4. GasHauler

    GasHauler Master FMCSA Interpreter

    6,257
    4,365
    Oct 23, 2005
    Vegas/Jersey
    0
    If the bucket and booms are attached to the equipment then a little common sense applys. I hauled mostly dozers and we never chain the blade unless it was seperate from the tractor itself. You have to look at what if a hydraulic line burst where would the boom go? FMCSR's cover what you need as far securing devices starting # §393.102. Remember if you load dozers, backhoes, or any equipment backwards besure to tape the exhaust stack closed.

    If you're loading equipment that is heavy ,like I did, then all the attachments must come off. Even if you're getting a permit. The states will tell you that you need to reduce the load if you can. Some of my loads I would have to make 2 trips, 1 for the dozer and the other for the blade. Make sure nothing can fall off the equipment while in transit. A lot of operators stash coke cans, greese guns, and whatever that you wouldn't see unless you went looking. Be extremely careful if you're loading on a steel deck when it's wet. I've seen guys turnover a small dozer on a tilt trailer becaujse it was wet and steel. Steel on steel does not stick very well and will slide in a heart beat. You should drive like you're hauling a smooth bore tanker full of nitro glycerin. Go slow and steady and avoid going too fast on ramps.
     
    Flying Dutchman Thanks this.
  5. Flying Dutchman

    Flying Dutchman Road Train Member

    1,274
    522
    Nov 2, 2009
    Northern California
    0
    Good info there, thank you!
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.