You should try the full tilt intake. Tracked mine during the summer and picked up almost .3 with it on an isx. This summer I'll prob do the exhaust
Flow Below Added
Discussion in 'Ask An Owner Operator' started by Siinman, Jun 13, 2022.
Page 38 of 91
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
Well got up at 5AM to take trailer to the shop and get the SmartTruck top kit installed. That is system I ended up ordering since nothing else seemed to be available. I had messed around for well over 3 months trying to get the other kit that I wanted with no luck. So will see how this thing helps out. Will be good to get a few runs in the cold so I have some kind of record of it before summer kicks in.
-
Had some utility trailers with that lip on the top. Wore holes in the roof, had to rivet/glue a plate across it. Took the rest off and filled in the holes.
Siinman Thanks this. -
Their illustrations helped me understand why they’re only on the upper 2/3 of the trailer. I’ll be curious to see how you do with this.
Siinman Thanks this. -
-
ducnut Thanks this.
-
Siinman Thanks this.
-
ducnut Thanks this.
-
My previous employer had a different style installed on their Utility trailers. They were always getting popped up from the rear. I know, you’ve probably seen that type flipped up, going down the road. However, it’s a different brand and design, so I was hoping the brand you chose would be more favorable.
Siinman Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 38 of 91