Freightliner alarm syste

Discussion in 'Freightliner Forum' started by jacksonotanner, Feb 8, 2021.

  1. jacksonotanner

    jacksonotanner Bobtail Member

    2
    1
    May 28, 2020
    0
    So I have a 2021 freightliner cascadia with the very annoying 4 digit alarm system in it. The one that you have to punch in the 4 digit code to be able to start the truck. It has suddenly stopped working. No red blinking light on it, and it isn't recognizing any buttons being pushed. Looking for a fuse that might have been blown or is there a way to just route around it?
     
    Flat Earth Trucker Thanks this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Flat Earth Trucker

    Flat Earth Trucker Road Train Member

    2,002
    4,809
    Nov 19, 2018
    0
    20210208_043753.jpg
    Don't you worry. The good folks at Freightliner are making the same effort as our guy in image above.
     
    Hye Thanks this.
  4. RocketyMan

    RocketyMan Medium Load Member

    431
    227
    Jun 5, 2015
    0
    Ignoring the non-value post above...what is the last 6 of the vin? I'd be curious as to what wiring exists for this feature. And also if it was a PDI or CWO installed component.

    If I had to guess, I bet this is a fleet truck and they're the ones to have it installed...but I could be wrong. (which is why i wanna check)
     
    Flat Earth Trucker Thanks this.
  5. Flat Earth Trucker

    Flat Earth Trucker Road Train Member

    2,002
    4,809
    Nov 19, 2018
    0
    20141102_181743.jpg
    Are you kidding? My posts are worth their weight in bacon.
     
  6. RocketyMan

    RocketyMan Medium Load Member

    431
    227
    Jun 5, 2015
    0
    @Flat Earth Trucker -_- ....LOL!

    Okay fine...gimme some bacon! This OP'r is a one (two) post-willie.
     
    Flat Earth Trucker Thanks this.
  7. Flat Earth Trucker

    Flat Earth Trucker Road Train Member

    2,002
    4,809
    Nov 19, 2018
    0
    See there? Bacon solves everything.
     
  8. Irishblood_83

    Irishblood_83 Bobtail Member

    11
    3
    Jan 11, 2021
    0
    Mine recently stopped working too. If you take the nobs off your brake releases and pull that panel off, behind it should be a set of wires with a fuse somewhere along it. I personally don't care for the alarm so I prob won't even replace it. Plus I'm having too many other electrical issues at the moment. Hope this helps.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  • Draft saved Draft deleted