Had this load on and he wanted to know why was loaded off center. Duh!!!
That's 40k in the middle with a cover over some pipes on the side.
He finally figured it out and let me go.
![]()
Got stopped by the OK HP
Discussion in 'Flatbed Trucking Forum' started by Old Man, Feb 11, 2017.
Page 1 of 7
-
Logan76, Dye Guardian, Lepton1 and 10 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
He just wanted your autograph, you're getting famous.
whoopNride, sawmill, Old Man and 1 other person Thank this. -
Do you use duct tape on the excess strap to keep it rolled up?
What's with the dunnage and chain in front of it? Different way of making a bulkhead? -
Don't see any flags on the overhang. Did you have banners or corner flags on?
G13Tomcat Thanks this. -
Gorilla tape, better than duct tape.
Piece is setting on friction mat but no good way to get a chain down low pulling to the rear, so a block in front to maybe keep it from going forward in a panic stop.Lepton1, rolls canardly, passingthru69 and 2 others Thank this. -
Gotcha. Very neat securement. I carry gorilla tape already. It's tough stuff.
-
Why wouldn't you load the overhang on the ditch side?
IH Truck Guy and j_martell Thank this. -
Buy cheap zip ties from harbor freight. They take less time and don't make straps sticky from glue residue.
soloflyr, snowwy, Ruthless and 1 other person Thank this. -
Looks like he did. There's a trip chain in front of the piece and if you look at the shadow you can see the rear deck is back there.Crusader66 and nate980 Thank this.
-
Gorilla tape don't leave
Stickey, got lots of harbor freight zip ties, such good quality they don't always zip.
It was flagged and signed legal, OHP approved and offset to the ditch side, no corner flag on a stick on the right rear so I could get thru the turnpike gate.
Logan76, Lepton1, OLDSKOOLERnWV and 8 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 7