3M decal eraser wheel. Works good on lettering and company decals. Should work on your stickers.
Hazmat Stickers
Discussion in 'Intermodal Trucking Forum' started by Osiris, Nov 8, 2017.
Page 2 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Ever since that day in 1998, while having a cuppa coffee with USDepressed, that I had to peel four stuck to the trailer in 11 degree weather, I carry a small torch. Longest freakin’ morning of my trucking life.
austinmike Thanks this. -
Get a wood chisel.
One around 2 inches wide. -
-
-
Heat by spraying starting fluid on them and light it on fire. It will burn out quick, while its hot scrape with putty knife. Repeat as needed. Have used a small torch also. Check with reciever, as you may have to move away to safer area if they have a no open flame policy.
-
Can’t beat this if you can power it.
Osiris Thanks this. -
-
-
Mosquitoes are repelled by it.its actually, probably, a mild poison. For me i will use the starter fluid method. It works and reasonably quick. When i empty a haz load i want those placards off as quick as possible!
NightWind Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 3