Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

I fried my cobra 19

Discussion in 'CB Radio Forum' started by labronze, Apr 12, 2021.

  1. Apr 12, 2021 #1
    labronze

    labronze Bobtail Member

    3
    0
    Apr 12, 2021
    0
    I couldn't bring the SRW low enough to tune the two 4' antennas, then they fried my set. I thing the two antennas were 1000 watts eash maybe to much wattage? Then I learned they needed to be at least 5 foot appart. So I reseached and found someone who said the dual two foot antennas worked perfectly. But I need more conformation feed back before I buy new antennas and another CB Radio, has anyone out there that can confirm or deny this?
     
    labronze, Apr 12, 2021
    labronze, Apr 12, 2021
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Apr 12, 2021 #2
    Timin770

    Timin770 Road Train Member

    1,612
    1,698
    May 27, 2011
    Canton, GA
    0
    I'd use a single antenna on driver side as tall as possible
     
    Timin770, Apr 12, 2021
    Timin770, Apr 12, 2021
    #2
  4. Apr 12, 2021 #3
    Ridgeline

    Ridgeline Road Train Member

    20,727
    100,978
    Dec 18, 2011
    Michigan
    0
    First thing is to see if you have it setup right, describe in detail how it is setup. What type of coax, jumpers, antennas ... etc. ... .
     
    Ridgeline, Apr 12, 2021
    Ridgeline, Apr 12, 2021
    #3
  5. Apr 13, 2021 #4
    Milkshakes

    Milkshakes Bobtail Member

    4
    1
    Jun 28, 2019
    0
    Rule of thumb is to keep both antennas at least 8ft apart.
     
    Milkshakes, Apr 13, 2021
    Milkshakes, Apr 13, 2021
    #4
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.