Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Ignition fuse blowing

Discussion in 'International Forum' started by Josh88, May 21, 2018.

  1. May 21, 2018 #1
    Josh88

    Josh88 Bobtail Member

    1
    0
    May 21, 2018
    0
    I have a 2007 Internaional 4300 with dt466 bucket truck , runs fine with pto off but when on and running the bucket it will blow the 5 amp ignition and diagnostic port fuse ,followed wires from ignition and dlc connector to fuse panel in dash and didnt notice and broken or bare wires I'm a bit stumped any info orbpointers would be great
     
    Josh88, May 21, 2018
    Josh88, May 21, 2018
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. May 21, 2018 #2
    Heavyd

    Heavyd Road Train Member

    7,625
    6,027
    Feb 4, 2009
    0
    I would suspect someone has wired power for the PTO from this fuse source and it is now shorted somewhere when engaged. That 5 amp fuse only powers your diagnostic port and ignition relays from the key switch. So follow A15 as best as possible and check for anything tapped into it that shouldn't be.
     
    Heavyd, May 21, 2018
    Heavyd, May 21, 2018
    #2
  4. May 31, 2018 #4
    Abcauto79

    Abcauto79 Bobtail Member

    1
    0
    May 31, 2018
    0
    What a15 .
     
    Abcauto79, May 31, 2018
    Abcauto79, May 31, 2018
    #4
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.