International 7400

Discussion in 'International Forum' started by SHAKIR, Aug 30, 2018.

  1. SHAKIR

    SHAKIR Bobtail Member

    2
    0
    Aug 30, 2018
    0
    HI GUYS I HAVE A INTERNATIONAL 7400 DT 570 WHEN THE ENGINE WARM IT SHUTS OFF BUT I REPLACED ALL THE INJECTOR ORINGS AND SEALS ON THE OIL RAIL. STARTS PERFECT IDLES LOVELY BUT THE MOMENT THE ENGINE WARMS UP IT SHUTS OFF PLEASE HELP ME GUYS...
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. RustyBolt

    RustyBolt Road Train Member

    2,073
    3,335
    Feb 21, 2015
    Bement, IL
    0
    Throwing any codes?

    Side note ... Using all capital letters is considered yelling when on a forum. Perfectly okay if you are mad though.
     
  4. SHAKIR

    SHAKIR Bobtail Member

    2
    0
    Aug 30, 2018
    0
    hahaha sorry i wasnt aware yes it is throwing codes as follows: 112. 115. 312. and 335.
     
  5. Heavyd

    Heavyd Road Train Member

    7,828
    6,277
    Feb 4, 2009
    0
    112 is battery voltage too high
    115 coolant temp signal out of range high - not temp, but circuit fault
    312 oil temp signal out of range high, not temp, but circuit fault
    335 ICP unable to build during crank.

    I would get your codes cleared and then run it until it shuts off and see what codes come back. If you get no codes, then you have a fuel problem.
     
    CraigInReston Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.