Since your a seasoned vet let’s say two instances I’m at a facility getting loaded how do I know if they loaded me over weight or not and same with of getting loaded in the feild ?
Ive chosen hopper over end dump ! I need help !!
Discussion in 'Tanker, Bulk and Dump Trucking Forum' started by iamfargo, Mar 20, 2019.
Page 4 of 5
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
iamfargo Thanks this.
-
@Ridlingdj my main concern as while I’m getting loaded to know when to tell them to stop so I’m not over weight I don’t want to get to a scale and have to go back because I’ve went over 80k .... and then with fuel let’s say I got loaded with a half tank now I’m on my trip and I fill up now that puts me over weight ?? So what’s your strategy with fuel and getting loaded if that ? Makes sense lol
-
If I have a chance should I fill up before I go get loaded Orr ??? Help me out and thanks for these useful tips
-
iamfargo Thanks this.
-
But most places know about where to load you they have done 100s of loads a month
iamfargo Thanks this. -
10.4 so how about this scale ??
Right Weigh | Digital Load Scale | 202-DDG-02C
Any good ? -
-
It depends on my trailer that I am using I now have 10 trailers but I used one of these 3 setups
Right Weigh | In-Dash Analog Load Scale | 510-46-C
Right Weigh | Analog Load Scale | 310-30-PP
Or just a standard pressure gauge to show how much weight the trailer has on the suspension
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 4 of 5