Junction box diagram

What is your last 8 of the VIN?

 

You are looking at the engine bay fuse panel. You won't find any fuses for the back up lights in there. On the passenger side behind the dashboard there is another fuels panel and this is where most of the cab lighting fuses. Depending on which transmission you have it might be fused internally in the body controller. I would need your last 8 to find out for sure.

 

Here is a link that you can download the complete wiring diagram for this chassis. Also I have the operators manual which will give you the fuse breakouts for both the engine bay and passenger side inside fuse panels.

https://drive.google.com/drive/folders/0B2sLAOb4bXKFSDV3bDZRQjZvRlk?usp=sharing


Let me know if you have any other questions.

 

This diagram seems really hard to find, so I took a picture of one.

 

On page 88 is where you will find the wiring... Attached in the diagram. There should be a 2 wire switch on the top of the transmission... with the key on and you jump the wires, does it turn on the lights and backup alarm if it is installed with one?

 

Any chance you have a similar link for a 2011 Prostar with VIN BN288806? Thanks,
Frank

 

You bet... Here you go.. ( https://drive.google.com/file/d/0B2sLAOb4bXKFc3FkdU9SR1ctVzA/view?usp=sharing)

Also you can purchase a USB stick with all the manuals for international chassis. There about $600 or so, but if you do alot of internaitonal truck repairs its worth it. It has all the electrical, chassis and engine manuals. Along with operator and maintenance manuals. Just have to ask your local dealer to order

USB drive, OnCommand Service Information (OCSI)
Product Number: 0000314661

From the online tools catalogue.