Kenworth T680

Discussion in 'Trucks [ Eighteen Wheelers ]' started by TruckerPete1990, May 22, 2022.

  1. TruckerPete1990

    TruckerPete1990 Road Train Member

    8,252
    4,597
    Jul 16, 2012
    Gentry Arkansas
    0
    The company im leased to decided to cut the wire coating right at the pigtail(Aftermarket lane guidance system).. I had just enough room to put a heat shrink connector on it. But the hood part i put heat shrink connector and wrap and loom around it.
    This is how the shop did the wire connection -.-
    377578-63650f5cd9b1a4348ed910492fbc00f2.jpg
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Another Canadian driver

    Another Canadian driver Road Train Member

    1,056
    3,823
    Nov 14, 2021
    ALBERTA
    0
    I'm not talking about the wire connector.
    The whole harness should be protected.
    I just ordered from the factory all my harnesses to be protected.
    I'm very happy about it.
    It really paid off.
     
  4. TruckerPete1990

    TruckerPete1990 Road Train Member

    8,252
    4,597
    Jul 16, 2012
    Gentry Arkansas
    0
    Yeah it has some kinda cloth protector on it. Tends to rub also next one im running plastic loom on the whole thing.
     
  5. spsauerland

    spsauerland Road Train Member

    4,199
    10,670
    May 31, 2010
    West Harrison, In
    0
    I have the pins and connectors because we have such an issue on the T880. I like to wrap the harness with a cloth harness tape I get from Summit racing and then wrap that with federal mogul nylogard fabric sleeve. You need a hot knife or titanium scissors to cut the stuff
     
    Accidental Trucker Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  • Draft saved Draft deleted