KW T2000 Clutch Issues?

Discussion in 'Kenworth Forum' started by IStayRolling, Jul 9, 2011.

  1. IStayRolling

    IStayRolling Bobtail Member

    9
    3
    Jul 8, 2011
    FL
    0
    I cannot shift down into lower gears 3rd and beyond without floating. If I press the clutch, the darn thing will make me stop before it will get in gear, any suggestions? Should I have it replaced? Or am I doing something wrong as I recenetly switched from a Cascadia, which had no problems at all shifting down into the lower gears. Thanks in advance!
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. BamBam7291

    BamBam7291 Bobtail Member

    22
    2
    Jun 10, 2011
    Verona,Va
    0
    I just had to have mine replaced as one of the 3 rods in the clutch was twisted.. It was slight enough that I couldn't see it but was shown to me and sever enough that I had no clutch left.. After having this done. I wound up in the shop again for crankcase pressure problems and over heating.. I was sending my antifreeze right out the stack.. Still waiting on the shop to finish with it.. Hope this helps
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.