Load shedding?

Discussion in 'International Forum' started by earnies2, Feb 12, 2020.

  1. earnies2

    earnies2 Medium Load Member

    690
    281
    May 17, 2012
    Dedham, MA.
    0
    I have jumped together both terminals on the load shredder and it still beeps and I loose my dome lights so I'm still shedding loads. 2009 prostar skyrise please advice
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. baha

    baha Road Train Member

    4,137
    2,834
    Jul 25, 2013
    ga
    0
    If you are by/passing the breaker thats not a good thing to do all/ways use a fuse in the jumper wire so you dont burn up hi $ part?
     
  4. Mike250rs

    Mike250rs Heavy Load Member

    881
    7,077
    Sep 24, 2019
    Raleigh, NC
    0
    First, I would figure out where your power loss is coming from.

    That system is designed to leave you enough power to start the truck. Bypassing it can lead to interesting consequences..mainly a road call to jump start your truck out in BFE at 3am.
     
  5. earnies2

    earnies2 Medium Load Member

    690
    281
    May 17, 2012
    Dedham, MA.
    0
    My power loss happens when I use my microwave the lag time between using my microwave and the trigger to start my APU sets off my load shedding but I have the 2 terminals together so it should be bypassed?
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.