lowering a w900
Discussion in 'Trucks [ Eighteen Wheelers ]' started by 24u2nv, Aug 1, 2015.
Page 2 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Pull the dipstick. You'll see it. Milky thick sludge substance. Pull a valve cover.
-
No milky abut at all
-
STEAM OUT THE EXHAUST?
And.....YOUR DONE....
Do not pass go. Please proceed straight to the nearest stealership shop! -
-
Could go to a 225 or 255/22.5 tire, that would drop it a few inches.
-
Do like the ricers and take a torch to the springs!
rollin coal Thanks this. -
If you lower the front too much you'll get vibrations from your driveline angles being all out of whack. Plus it will eat u-joints. Unless you bag the front so it drives at normal ride height and then dump the air when you park it.
-
-
Truck is a 88 going to be used only as a show truck hauling my rat rod on the back. never hauling anything else probably at best 5.000 miles a year
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 4