LT2 echo board (old)

Discussion in 'CB Radio Forum' started by JCrouch1983, Nov 12, 2010.

  1. Nov 12, 2010 #1
    JCrouch1983

    JCrouch1983 Bobtail Member

    12
    0
    Nov 10, 2010
    0
    I have a Cobra 29 LTD Classic made in 1991. Recently found out it had an echo board installed. I was just curious why the board replaced my delta tune control and my SWR CAL. The original controls were taped up and tucked away in the case. Is this how it is normally installed?
     
    JCrouch1983, Nov 12, 2010
    JCrouch1983, Nov 12, 2010
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Nov 12, 2010 #2
    Izlomik Supatrucka

    Izlomik Supatrucka Light Load Member

    158
    20
    Oct 24, 2009
    Texas
    0
    yes this how most shops install the echo pod on these radios....the delta tune knob is rarely used
    and basicly useless and the swr meters in radios are junk so they are rarely used as well so
    they tape them up and tuck them inside the radio and put the echo control in its place
     
    Izlomik Supatrucka, Nov 12, 2010
    Izlomik Supatrucka, Nov 12, 2010
    #2
    JCrouch1983 Thanks this.
  4. Nov 12, 2010 #3
    JCrouch1983

    JCrouch1983 Bobtail Member

    12
    0
    Nov 10, 2010
    0
    thanks for the info, any suggestions on a new mic?
     
    JCrouch1983, Nov 12, 2010
    JCrouch1983, Nov 12, 2010
    #3
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.