Maintenance schedule on 4300 DT 466

Call local International dealer.

 

Copied and pasted from the manual;

Daily Check oil level1 Check coolant level1 Drain water separator1 Inspect Charge Air Cooler (CAC)1 Inspect for external leakage1 Inspect air restriction indicator2

240,000 km (150,000 miles) 2–1/2 years 6,000 hours
Extended life coolant7

24,100 km (15,000 miles) 6 months 550 hours
Change engine oil and filter and secondary filtration filter, if equipped (See CAUTION)3, 8 Inspect belt, air intake piping and clamps Check coolant concentration

24 months Pressurize induction system1, 4

48,300 km (30,000 miles) 12 months 1,100 hours
Change fuel filter and clean strainer5

290,000 to 322,000 km (180,000 to 200,000 miles) 6,700 to 7,500 hours
Measure crankcase pressure4 Inspect turbocharger1

Annually Inspect electrical system1

500,000 km (300,000 miles) 5 years 6,000 hours
Service cooling system

193,100 km (120,000 miles) 5,000 hours
Inspect vibration damper1, 6 Adjust engine valve lash4, 6 Adjust engine brake lash4, 6