@rabbiporkchop
Ever heard of either of these linears. Both are obviously a bit vintage. The Varmint is one I used until about 1995 with the 29LTD it's on, it was a talker back then but has been in a box since then. The G/Spot was given to me a couple of months ago, supposed to be a good talker but haven't tried it out yet.
Thinking about possibly putting one or both back in service, after having them gone through of course.
![]()
![]()
Midland VS Cobra witch is better for truckers orenthusiasts
Discussion in 'CB Radio Forum' started by kwfan558, Jul 14, 2011.
Page 3 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I'm not familiar with those other than randomly hearing the name mentioned once or twice.
-
Quote: "After hearing me talk to another driver about my setup, many others keyed up with astonishment. They though I had a big radio, when really it was a cobra 25 (tuned up a little higher than 4 watts) and a magnetic little wil antenna."
I'd say they should be impressed with the performance of a magnet-mounted, three-foot antenna. I've got such a shorty on my sedan because it fits in my garage, and it, too, does yeoman's work that can be impressive.BTShepp Thanks this. -
Uniden!
-
I run a Cobra 19 with a little magnetic mount antenna in my pickup and I love it!
BTShepp Thanks this. -
I would not buy a Cobra because they're made by a company in China with a lot of problems. Buy a Uniden 980 SSB /weather.
-
This Chinese Cobra 29 works quite well.
-
My first mobile cb radio in the 70’s was a Midland. I think the model number was 13-830 or something like that. It had great receive, very low noise floor. A lot like my president Madison. The top angled down slightly so u can see the meter and channels. They made a black face model, but the one I had was chrome. I’ve been tempted to buy a 5001z and try it in place of this cobra 25 I’m using now. I can’t vouch for the new midlands, but back in the day I think they were as good as the other radios. They had many models to choose from too.
rabbiporkchop Thanks this. -
I used to run an RCI 2970n2 on 10m all the time. I'd sit in Tampa Fl and talk to guys in Cal all the time using a Wilson 1000 trimmed for 28mhz. The secret to that radio is a service manual alignment and NO mods.
-
I use a Midland 1001z and Cobra 19 DX IV interchangeably. They are both great little compact radios and get the job done equally well. They are especially useful in non-permanent installations that are easy to take in and out and plug into the cigarette lighter port. When used with my magnetic mount antennas, I am up-and-running in a different vehicle within a couple of minutes.
BTShepp and rabbiporkchop Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 3