your a pathetic excuse for a person rabbi bad 239 connector telling me I ran that amp with that radio ... it would still have nothing to do or change the fact your boy stripped the screw in the amp plate. and left a disconnected wire stuck under the faceplate.... Chris Holland does quality work.... hack tune can't even get minor s--t as stated above right. your the p.o.s. liar on here rabbi keep saying anything on here to make yourself feel better. I knew you were a piece of crap right away when I joined this site
My new radios
Discussion in 'CB Radio Forum' started by rabbiporkchop, Oct 30, 2016.
Page 4 of 16
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
how the hell do you live with yourself I've had and run that big amp on and off for 3 years and I don't run full power off a radio into it.. hack tune cut the balls off that radio and then tells ya to run it at half power. and were not talking about anything to do with that amp..like I said before that was a 365/375 watt radio all day long ding dong cuts the power down to 300 watts and then tells ya to run the radio at half power...you can get that big amp of mine outta your head.... at least I know how to run it .. we saw the piece o #### amp you bought and blew.up... your a real smug bas-turd who's way too arrogant and assumes things he should never assume.... you and ole hack tune mark Sherman are perfect for each other 2 worthless arrogant ### holes
-
What you told Mark on the phone and what you are telling us in this forum are two totally different things. A little consistency would be appreciated.
It's always the people who are unable to follow instructions who seem to have the biggest problems. Anytime we let our opinions get in the way of what we are told to do that is quite often our biggest problem.. -
Chris Holland strips that screw out when he installed that amplifier board he put the wrong screws in or he lost one of your screws and he cross threaded it when he installed the amplifier board and when Mark remove the screws the head broke off of one of the screws that Chris Cross threaded when he worked on your radio which is precisely why he doesn't like working on other people's screwed up stuff and he would prefer to sell you something new so he can accept full responsibility for everything that was done but since Chris was in the radio before mark how can you expect Mark to accept responsibility for something that Chris did? See you're only telling one part of the story you're not telling the whole story. There's always two sides to every story.
-
The videos before and after tell the whole story.
If you look at the video before he worked on your radio it shows what Chris did to your radio and if you watch the video after Mark worked on your radio it shows what the radio was like when it arrived at your doorstep. -
Im gonna need some popcorn to watch all this work its way..
Any chance in this goin hi def?? -
Yeah really started to pop some now, with extra butter.
What puzzles me is this was rabbi on the phone with the two of them?
Anywho the saga continues... -
Rabbi did mention somethin about the before and after vid..Didnt see myself but thats alot of detail about his coax/stud/amp and radio so someone is talkin..
-
Where?
-
Page 3 about half way down..
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 4 of 16