I just bought a bearcat980 for my 2018 international LT and it comes with everything already there the power wires and antenna even has a plug for a pa system anyway I know green wire is the hot wire so I hooked it up green=red and white=black but I'm not getting power I tried turning the key to on position still nothing I even started the truck and still nothing what am I missing
Need help with installation
Discussion in 'CB Radio Forum' started by Apollyon, Nov 7, 2017.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
jessejamesdallas Thanks this.
-
I did but I'm not sure what ones. I know it should be accessories. All the fuses that are there look fine.
-
-
Pick up a cheap volt / ohm meter at Walmart, and see if you have 12 volts getting to the green and white wires. If there’s no power there, then you need to determine which fuse in the power box supplies power to these wires and see if it’s blown. The meter will take the guess work out of it.
jessejamesdallas Thanks this. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.