Freightliner cascadia evolution 2016
Hey guys I can’t seem to find the problem with my Freightliner , my psi dropped to 40-60 I searched for a leak but can’t seem to find one, governor is new, air tanks emptied out , now my airbags are deflated I don’t feel pressure going to airbag lines , any help suggestions?
No pressure build
Discussion in 'Questions From New Drivers' started by Enrique95, Jun 6, 2025.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
You didn't mention the engine.
I had a problem with a couple of trucks using a 'direct replacement' governor, they were not a direct replacement, one line had to be switched.Enrique95 Thanks this. -
With the engine running is your compressor engaged and pumping air?
If the compressor isn’t kicking on it will probably be your unloader valve.
I’m definitely not a mechanic by any means but it sounds similar to what I’ve gone through before.77fib77, Enrique95 and nextgentrucker Thank this. -
Bad governor, or a worn-out compressor comes to mind...
-
Thank you guys for response in the end I checked every single one of your suggestions and it turned out to be the air hose that is connected to the compressor, tho u couldn’t see it because of the. 90 fitting and being tucked underneath the cab and between the frame itself . Thank you guys
kemosabi49, wulfman75 and Concorde Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.