Noise cancelling mic

Discussion in 'CB Radio Forum' started by stacks, Aug 16, 2018.

Page 1 of 3
  1. Aug 16, 2018 #1
    stacks

    stacks Road Train Member

    1,547
    850
    Oct 27, 2011
    Emerald Isle
    0
    what is a good model I have a rci 2950
    Dx which is
    A 6 pin connector original mic is Broken inside so I’ve been looking at a sra 198 Noise cancelling mic anyone use one
     
    stacks, Aug 16, 2018
    stacks, Aug 16, 2018
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Aug 16, 2018 #2
    Tensleep440

    Tensleep440 Light Load Member

    113
    63
    Mar 29, 2018
    NE Corner of Texas
    0
    Love the SRA-198, it’s the only mic I use now.
     
    Tensleep440, Aug 16, 2018
    Tensleep440, Aug 16, 2018
    #2
    stacks Thanks this.
  4. Aug 16, 2018 #3
    rabbiporkchop

    rabbiporkchop Road Train Member

    9,678
    6,546
    Feb 9, 2012
    Wapwallopen, Pa
    0
    rabbiporkchop, Aug 16, 2018
    rabbiporkchop, Aug 16, 2018
    #3
    Oldironfan, Sirscrapntruckalot, Timin770 and 1 other person Thank this.
  5. Aug 16, 2018 #4
    stacks

    stacks Road Train Member

    1,547
    850
    Oct 27, 2011
    Emerald Isle
    0
    I shall have a look online and check the Reviews
     
    stacks, Aug 16, 2018
    stacks, Aug 16, 2018
    #4
  7. Aug 16, 2018 #5
    Tensleep440

    Tensleep440 Light Load Member

    113
    63
    Mar 29, 2018
    NE Corner of Texas
    0
    The SL41 is also a fine mic from what I’ve heard. Both have excellent audio quality and a more natural sound rather than the tinny sound in a RK56 or 636L
     
    Last edited: Aug 16, 2018
    Tensleep440, Aug 16, 2018
    Tensleep440, Aug 16, 2018
    #5
  8. Aug 16, 2018 #6
    Timin770

    Timin770 Road Train Member

    1,658
    1,759
    May 27, 2011
    Canton, GA
    0
    Gotta agree with Rabbi. I snatched an SL-41 up before the relatively short production run ended
     
    Timin770, Aug 16, 2018
    Timin770, Aug 16, 2018
    #6
    rabbiporkchop Thanks this.
  9. Aug 17, 2018 #7
    stacks

    stacks Road Train Member

    1,547
    850
    Oct 27, 2011
    Emerald Isle
    0
    What radio are you using with that mic
     
    stacks, Aug 17, 2018
    stacks, Aug 17, 2018
    #7
  10. Aug 17, 2018 #8
    rabbiporkchop

    rabbiporkchop Road Train Member

    9,678
    6,546
    Feb 9, 2012
    Wapwallopen, Pa
    0
    This one.
    [​IMG]
     
    rabbiporkchop, Aug 17, 2018
    rabbiporkchop, Aug 17, 2018
    #8
    Oldironfan and stacks Thank this.
  11. Aug 18, 2018 #9
    stacks

    stacks Road Train Member

    1,547
    850
    Oct 27, 2011
    Emerald Isle
    0
    I would probably go with a ranger sra 198 it’s a lot cheaper than the mic you mentioned .
     
    stacks, Aug 18, 2018
    stacks, Aug 18, 2018
    #9
  12. Aug 18, 2018 #10
    Night Stalker10

    Night Stalker10 Road Train Member

    1,697
    1,271
    Jun 26, 2017
    0
    I really like the sra 198 mic with this cobra 25 that I use. The audio was a little weak sounding due to the noise canceling feature of the mic. So I had to mod the audio circuit a bit in the radio, and now it sounds great. I suppose if I ever use this mic on my other radios, I will have to adjust the audio circuit in them too. I sure like the sound of this mic, plus it’s well built.
     
    Night Stalker10, Aug 18, 2018
    Night Stalker10, Aug 18, 2018
    #10
    stacks Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 1 of 3