Hello to every one im new to this forum so if you guys can help me
my story is
05 volvo 780
isx 475
my guy update a software and installed a 550hp/1850 non emission version on it
it is a cummins software (don't ask where he got it)we went with serial# of the engine and this is a right software for it
so it was ok till I cleaned up my exhaust pressure sensor
then it start smocking badly every time I shift and when turbo spools up at about 1400-1500 rpm
but its not a problem every morning when i start a truck I hear a little back fire or exhaust kind of sound In air filter box and if I will try to drive it
it have no guts at all but its not smocking at any rpm range and if I will floor it the fan will kick in and the abs light will come on after I let go a throttle fan stops abs go's away
as soon as I unplug a exhaust pressure sensor for 30 sec every thing go's back to normal gets plenty of power no fan no abs but it start smocking again
I changed a sensor checked the wires all good
next think is load a oe software but I don't won to I like the power
and the egr is closed all sensors in place
so if any one out there can figure it out pleas let me know
thanks Sam
Pleas Need help 05 volvo 780
Discussion in 'Volvo Forum' started by samvel1981, Sep 20, 2013.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Wrong thread
-
I'm sure it's illegal to mess with the emmisons like that. Hope you don't get caught.
-
what ecm? what calibration waqs used/? what calibration installed?
imo - wrong galibration file was used -
This tuck I sold to mexico this what the costumer ordered im only test driving just making shore every thing is ready to go
thanks for the input -
I will try to get every think I can
will post hear
thanks -
Thanks for everything guys all it was is a boost sensor connection
baha Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
