Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Prostar Coax

Discussion in 'CB Radio Forum' started by Boondocker, Apr 20, 2019.

  1. Apr 20, 2019 #1
    Boondocker

    Boondocker Light Load Member

    110
    120
    Nov 17, 2010
    NE Pa
    0
    Has anyone tried pulling the new coax in with the old. I have done the with house wiring,automotive wiring and even 7/8 in roll off cable. I was thinking soldering the two together . Or how is the alternative of removing panels. Just don"t know if it is tied,clamped or attached to other wiring. Thanks Steve
     
    Boondocker, Apr 20, 2019
    Boondocker, Apr 20, 2019
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Apr 20, 2019 #2
    Slowmover1

    Slowmover1 Road Train Member

    1,491
    1,208
    Oct 25, 2015
    Fort Worth
    0
    Trucks usually have their panels secured by a few screws. Like doorplate. Then one can start on lower part of A-pillar and work upwards.

    “Pry” is straight out. Use tools to get underneath. Held by clips. Too much angle and they break off.
     
    Slowmover1, Apr 20, 2019
    Slowmover1, Apr 20, 2019
    #2
  4. Apr 20, 2019 #3
    Timin770

    Timin770 Road Train Member

    1,612
    1,699
    May 27, 2011
    Canton, GA
    0
    Timin770, Apr 20, 2019
    Timin770, Apr 20, 2019
    #3
    slim6596 Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.