quality carriers/cletex

Discussion in 'Tanker, Bulk and Dump Trucking Forum' started by realsupatrucka, Apr 13, 2014.

  1. Redman30

    Redman30 Light Load Member

    140
    60
    Oct 28, 2013
    Abilene,Tx
    0
    Hate to hear this RealSupa
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. realsupatrucka

    realsupatrucka Road Train Member

    2,072
    513
    Sep 25, 2013
    houston tx
    0
    I tried that. ..I drove 25 miles dome lid open with both vavles open and they said it was wet at the back
     
  4. wsyrob

    wsyrob Trucker Forum STAFF Staff Member

    5,769
    5,463
    Sep 14, 2007
    Winston Salem
    0
    Did you take apart the external valve and dry the pipes out with paper towel. That is the only way I can think that they would know about moisture in the back . I carry a 16 ft pole and can swab around the dome lid up and down the tank. If the tank was hot it might have sweated some more after you closed it up
     
  5. realsupatrucka

    realsupatrucka Road Train Member

    2,072
    513
    Sep 25, 2013
    houston tx
    0
    Nah I didn't take it a loose....I did once and caught hell trying to put it back together. ..I finally got loaded im on my way to the house now...ill be there tomorrow
     
  6. realsupatrucka

    realsupatrucka Road Train Member

    2,072
    513
    Sep 25, 2013
    houston tx
    0
    Thanks for the info about the external valve ima start takinh it a loose for practice
     
  7. wsyrob

    wsyrob Trucker Forum STAFF Staff Member

    5,769
    5,463
    Sep 14, 2007
    Winston Salem
    0
    Just loosen that big wing nut looking thing and you can remove that clamp and take the whole valve out. I never take apart the nut on the shaft but there is some packing material in there that can be replaced if you have a leak.
     
    88 Alpha and realsupatrucka Thank this.
  8. realsupatrucka

    realsupatrucka Road Train Member

    2,072
    513
    Sep 25, 2013
    houston tx
    0
    Are u talking about the black ring valve thing?
     
  9. coolcat

    coolcat Bobtail Member

    29
    7
    Jan 13, 2013
    0
    Pictures would be great.
     
    realsupatrucka Thanks this.
  10. wsyrob

    wsyrob Trucker Forum STAFF Staff Member

    5,769
    5,463
    Sep 14, 2007
    Winston Salem
    0
    Next time I take one apart I will post some. It may be a while.
     
    coolcat Thanks this.
  11. wsyrob

    wsyrob Trucker Forum STAFF Staff Member

    5,769
    5,463
    Sep 14, 2007
    Winston Salem
    0
    Ours are stainless. There is a clamp that holds the round external valve to the trailer. It's the last one that you open to unload. If you take that clamp off that entire valve assembly comes out for cleaning. I believe the clamp is called a QRD clamp.
     
    coolcat Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.