Looking to purchase the Stryker 955hpc radio for my 2011 Freightliner Columbia. I know it needs the mod to be converted to 11 meter which I can do but do I need to run the power source for this radio straight from the batteries or can I use the provided power output that is used for a regular cb that came with the truck. Thanks
Stryker 955. adequate power source
Discussion in 'CB Radio Forum' started by 2hot2handle, Mar 19, 2019.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I would just test fit radio up there to see if your ok with it 1st...
Consider running your fresh coax to and power/gnd..Wouldnt use factory supplied..Its most likely not gonna give it a good constant power it needs....
If you do use a new power gnd wire,go 10ga.. -
-
Yeap...Those glass fuses are a bit wimpy but stick close to same rateing..
-
after watching the vid go to the comments and supplys you will need are there..You just pick it up from who you seem fit to..Makes a diff..
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.