I would try retuning that ant..Makeing sure you have lotsa metal under it..We are talkin anout swr and not power or rec sig right??
stryker sr-955hp ANTENNA SETUP
Discussion in 'CB Radio Forum' started by kachup, Jul 19, 2014.
Page 2 of 5
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
There is somethin i was reading on a 2:1 ratio being equal to a 1:1 but i dont remember what it was..
-
Antenna works fine. My external swr meter shows 1.3:1 at dead key and rises to 1.4:1 at 100% modulation. It also works fine with my uniden and 1x2 amplifer. It's just the 655 and what it shows on the digital meters on the radio that don't match real world readings.
-
-
Do you not believe that to be the case?
-
No no no..just sayin ok as in i understand..Still dont understand why swr raises..Never noticed it before on any meter with power change..
-
Modulating a signal and taking the SWR from that is useless.
Just key it up, take it from there.
ALSO I thought I said this before, don't trust the internal meter on the radio, it is there for one reason.Ougigoug and rabbiporkchop Thank this. -
I just use my internal as a guide..If in tuning well thats what an amalyzer is for..
-
Yeah my time with my 655 in the last two days really kind of bummed me out. But I still like the way it sounds, and it has a great receiver. Just disappointed in the fact the meters in my radio are so far off.
-
Get ahold of shawn from stryker and see what can be done.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 5