Tarp was working fine then all of a sudden ya not working any advice on what to check before I go and buy a tarp motor. Thanks
Tarp issue
Discussion in 'Kenworth Forum' started by Movingw8inc, Mar 20, 2020.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Check tarp sensor.could be bad.
Movingw8inc Thanks this. -
Thanks is that located on the motor it’s self
-
-
first thing you want to check is in the battery box. Those 2 heavy gauge wires from the tarp switch goes to the battery box. There should be a circuit breaker in line right near the positive wire near the battery post. Alot of guys including my self just wrap it in electrical tape instead of mounting it. I always keep a spare in my truck. sometimes they pop and need to be swapped out. so check that first by bypassing it. IF it works after bypassing, replace it. they are like 20 bucks. Next you will want to check your switch, they crap out just like the breaker. They are cheap as well.
heres a pic of the breaker. Doesnt sound like you are, but if you know how to use a multimeter, you can easily trace your wires to see if they are hot at all the points you want to check. mainly at the motor. I have no idea what a trap sensor is and what it senses but hey maybe some triaxles have such a thing.pushbroom Thanks this. -
Thanks y’all I tracked down the wire cut in half in rear under bed.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.