The "DRIVING RANGE"...

I'm in NC too! The best advice that I can give you is take your time and if you're not 100% sure GOAL always. It is better to look and be aware of your surroundings and any obstacles that may be in your path as you back up...like poles, awnings , parked cars etc. Better to take some extra time or a pull up or 2 to be sure. Also never let any of the super truckers that YOU WILL run into make you over drive your skills...with some practice and a little patience you will soon be backing like a pro!

 

You are welcome....I'm retired now for about a year and enjoying every second of it. Good Luck in your career!

 

Dont over steer when going backwards. Many people do and their truck looks like a fish flopping out of water. If you turn it slowly as going in to spot it will go right in.

 

It is all about the initial setup. Go slow, get out and look as much as you need to. put on your flashers and turn the cb off. other than that practice, practice, practice

 

Search on Youtube. Search "semi truck backing up" or similar. You'd be surprised at what will come up. Some pretty good some not so good. Some will show a birds-eye view of the backing processes to help give you a new perspective. I assume the school has some decent video lessons but perhaps they don't. Until you've seen it done right and comprehend what happened and why/how it happened, backing will be difficult.

 

My trainer told me to back up with my hand on the lower part of the wheel that way you move left to go left etc. Really worked for me

 

Maybe this will help:

Use the steering wheel to your advantage! Everybody teaches "steer the opposite direction"...bad thinking, poor instruction!

Your visual part of your brain is already doing a "reversal" with all the information coming in through the eye...it has to reverse the image to be processed. So when you try to think "opposite" you actually are stressing yourself a bit more. Here is the trick I taught all my students for 15 years:

The top of the steering wheel turns the direction you want going forward, the bottom of the steering wheel turns the direction you want to turn going backwards.

The set up is the most important part of backing into a dock or parking location. Let's learn what I call the "Banana Profile":
1. With the units in a straight configuration, drive across the front of the location until the space between the tractor and trailer is at the midpoint of your location.
2. As you cross this midpoint, turn right to a 45 degree angle away from the point. Drive straight (45 degrees from the location) until the tandems are at the midpoint of the location. (You must be watching your driver’s side mirror) As the tandems attain the midpoint turn the wheel left (again) to put a bend in the tractor/trailer until you have achieved the "Banana Profile". (The tractor/trailer has the same shape as a banana.) Now straighten up and continue until you have clearance of the driver’s side rear corner of the trailer and the location the trailer will be backing into.
3. At this point, you should be able to smoothly "track" right into the "hole". Just visualize the line and adjust the turn aspect (declining) as you enter the hole and straighten up as you go.

LET THE TRAILER DO THE WORK...ADJUST TO THE TRAILER, DON'T FORCE THE TURN MOVEMENT BY OVER STEERING. The longer the trailer, the more time it will take to show its movement. Don't get anxious, be patient, and let the trailer make some movement, then you correct the tractor to the movement of the trailer.

1. When backing, place your hand palm down on the center bottom of the steering wheel.
2. Use the bottom as your guide for the direction you want the back of the trailer to move.
3. Having your hand, palm down, gripping the wheel will prevent you (with the natural limits of movement) from over-steering. DO NOT LET GO OF THE WHEEL!
4. Grip the window post (the separation bar between the wing window and the door window) with your left hand, and again, DON'T LET GO. This "anchor" stops you from moving around in your seat...every time you move it changes the visual perspective in your mirrors...SIT STILL!
5. A tractor/trailer combination will NEVER back in a straight line...you need to "add" and "subtract" turn movement constantly. A little adjustment either way will keep the units straight and where you want to go.
6. If there is no "guide line" painted on the surface, visualize the straight line you want to line the driver’s side (sight side) of the trailer then the tractor onto.
7. When you start backing, pay attention to the tandems (trailer wheels)...these are your first and primary points of lining up the unit. As soon as the tandems have gone into the box, begin reducing the turn aspect of the tractor (bring the nose around to the "square line" with the trailer. Now change your focus to the midpoint of the trailer...just before the midpoint gets to the "line", get the tractor square with the trailer so there is no turn occurring...you have achieved the aspect of straight line backing once the tractor is square with the trailer and the midpoint of the trailer is in the box.
8. Keep in mind there are 3 "pivot points" to a tractor/trailer combination.
8a. Tandems are the rear pivot.
8b. King pin (drive wheels) is the center pivot.
8c. Steer tires are the forward pivot.
To move the tractor trailer either direction (right or left) you must accomplish an "S" configuration/movement with the tractor/trailer. Which direction you need to move the units is the direction you begin the movement. (This is for forward adjustments...if you have not centered the units in the dock.) To move it will require 3 steering movements...make sure the movement is sufficient (far enough forward in distance) to achieve the moving distance required (right or left). Just imagine you are driving on an "S" painted on the ground and follow it COMPLETELY.
__________________