I have a thermocline evolution on my Pete. It was working fine all night, I shut it down to check the oil this morning & now it won't start up, the fan won't even start. I was told there's a reset button, but can't locate it.
Any ideas?
thermo king apu En9
Discussion in 'Trucks [ Eighteen Wheelers ]' started by Ezrider_48501, Sep 14, 2011.
Page 2 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Should be a rectangular or square box maybe 7 inches square by 3 deep located low on the back wall of the sleeper under the bunk, push in button and it will click when it resets.
Haven't had 1 for a long time, but this is what I remember.TruckerDaisy Thanks this. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Reset button worked for me! Yay thanks fellows.
-
If the reset button doesn't help then pop the APU cover and unplug and replug the wiring for every sensor you can find.
25(2)+2 Thanks this. -
After doing a Regen, APU will not start. En9 light shows on heads up display. Reset button under the bunk has not tripped and will not reset. On off switch at motor has been turned off and on several time in an attempt to restart but still not starting. Fan under bunk will run for a few seconds but starter will not engage...any ideas please
-
-
I was running only the fan, didn't need heat or ac, and it worked fine. Then suddenly the unit started up and then shut off throwing En9 code. Let it sit for several hours and tried to turn just the fan back on. On the fan comes on, not the unit itself but then the fan immediately cuts off and throws the En9 code again. Does anyone have any ideas? Thanks
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 2