Time scale for a peak and tune

Don't peak and tune it, work on the antenna first.

 

From all the post i been reading on screwed-up CPU's on the 955, think I would leave it alone!

 

Dont let wallcott touch it..Listened to a cpl drivers runnin across a wack of freq and when i searched them out they were on the far side of the iowa trk stop..It was way loud even at low volume and a lil hard to understand..

 

To take your 955 outta the box for the 1st time till done by a good tech who goes through EVERYTHING i think its 3 hrs...I think...Its a # thats stuck in my head for some reason..Its gonna be a solid hr for sure....Updates,tune both tx/rec,conversion and all that techy stuff i dont know but watched techs vids to see..

 

Twisting screws and following a service manual shouldn't take over an hour. Not sure what anybody would hope to accomplish by doing so, since it was already done at the factory. Cheaper to leave it alone.

 

Rabbi...Always room for improvement and "improvement" being the key word..

 

Yeah there is but if you just hand it to someone without looking at everything else. Start with the antenna and perfect that before messing with the radio.

 

True..Im just answering his question specifically..

 

A few shops only.