Tons of tools and equipment

Dave_in_AZ · Apr 7, 2023

zaroba said: ↑

Things where great at the start of last year, drained my savings with a $40k down payment on a new house for my mother.
Started to rebuild my savings, PennDOT screwed me by "loosing" my registration payment for 2 months, during which the economy went to crap. My bills fell behind.
Managed to keep running, but hardly managing to pay bills. Was at the point I had to wait for quickpay to buy fuel and take another load which meant less income and bills piling up.
End of Feb my turbo blew in WY. There went my little savings again and I had to take out a horrible loan to get it fixed, got my truck back early March. Between the tow, repair, and hotel stay, maybe $15k spent.
Start of last week I broke down again, in WA, between attempted road service, tow, repair, and hotel, another $4k spent just because an o ring and clamp on a fuel line went out letting air get sucked into the fuel system.
Yesterday I broke down yet again, in OK, maximum derate limp home mode. SCR needs to be replaced and the shop is estimating over $6k so far.
Click to expand...

My SCR was $7600 two years ago. So yes they are a hit.

Big Road Skateboard · Apr 7, 2023

Dave_in_AZ said: ↑

Sounds like he's a road savage. Driving record isn't AFU, I have an empty truck sitting here.
Click to expand...

That's just awesome

Opus · Apr 7, 2023

nikmirbre said: ↑

Im willing to put my money where my mouth is and contribute some $ to help get you a rent a car and home.........anyone else.....
Click to expand...

I'm in for $200. Let me know how to do it

lip zee · Apr 14, 2023

zaroba said: ↑

Considering taking this stuff to a pawn shop since I'm basically done and wont be able to take most on a bus home, but figure I'll see if there's any interested people here who want to make offers.

Currently located at MHC Kenworth in Oklahoma City.
If anybody is in the area and wants to look at and possibly buy any of this stuff, let me know.

50ft gladhand airhose with a quick release fitting on the end, on a spool.
100ft extension cord on a spool
20ton pnumatic bottle jack
Locking plyers ranging from 8" to 18"
Adjustable wrenches ranging from 8" to 24"
3 ton pallet clamp
I think 40ft of chain for that above pallet clamp
15.5ft telescopic ladder
breaker bars from 17" to 40"
48" wrecker bar
36" crowbar
16" prybar
250lb torque wrench
600lb torque wrench with case
Neiko digital torque meter
two 100ft rolls of DOT tape
Aircat 1/2" drive impact wrench
Lots of 1/2" and 3/4" drive impact sockets, extensions, drive size adapters, and universal joints
old 1/4" and 3/8" non-impact socket wrench set
over a dozen straps for etrack, many unused
few bottles of howes diesel treatment
2 empty 2.5 gallon fuel jugs
almost 2 cases of grease tubes that can be used for PMs or a 5th wheel
grease gun
pneumatic grease gun
various screw drivers
metric and sae allen wrench sets
torx allen wrench set
battery powered leaf blower (don't know if the batteries are still good)
electric angle grinder
electric screwdriver

Diagnostics laptop (Heavy Duty Diesel Laptop Tuner Scanner Diagnostic Repair Truck)
NEXIQ USB link 2 (so the above laptop can work with newer trucks).

Wally dish receiver
32" lcd tv
Winegard Durasat D4 reciever (set to Dish but can also be set for DirecTV and other satellite TV providers)
toaster oven
electric skillet
mini waffle maker
1000 watt microwave
Click to expand...

zaroba said: ↑

Considering taking this stuff to a pawn shop since I'm basically done and wont be able to take most on a bus home, but figure I'll see if there's any interested people here who want to make offers.

Currently located at MHC Kenworth in Oklahoma City.
If anybody is in the area and wants to look at and possibly buy any of this stuff, let me know.

50ft gladhand airhose with a quick release fitting on the end, on a spool.
100ft extension cord on a spool
20ton pnumatic bottle jack
Locking plyers ranging from 8" to 18"
Adjustable wrenches ranging from 8" to 24"
3 ton pallet clamp
I think 40ft of chain for that above pallet clamp
15.5ft telescopic ladder
breaker bars from 17" to 40"
48" wrecker bar
36" crowbar
16" prybar
250lb torque wrench
600lb torque wrench with case
Neiko digital torque meter
two 100ft rolls of DOT tape
Aircat 1/2" drive impact wrench
Lots of 1/2" and 3/4" drive impact sockets, extensions, drive size adapters, and universal joints
old 1/4" and 3/8" non-impact socket wrench set
over a dozen straps for etrack, many unused
few bottles of howes diesel treatment
2 empty 2.5 gallon fuel jugs
almost 2 cases of grease tubes that can be used for PMs or a 5th wheel
grease gun
pneumatic grease gun
various screw drivers
metric and sae allen wrench sets
torx allen wrench set
battery powered leaf blower (don't know if the batteries are still good)
electric angle grinder
electric screwdriver

Diagnostics laptop (Heavy Duty Diesel Laptop Tuner Scanner Diagnostic Repair Truck)
NEXIQ USB link 2 (so the above laptop can work with newer trucks).

Wally dish receiver
32" lcd tv
Winegard Durasat D4 reciever (set to Dish but can also be set for DirecTV and other satellite TV providers)
toaster oven
electric skillet
mini waffle maker
1000 watt microwave
Click to expand...

You still around I'm interested.

nikmirbre · Apr 15, 2023

@zaroba ,,,,,,you still around? You make it home?

zaroba · Apr 15, 2023

lip zee said: ↑

You still around I'm interested.
Click to expand...

nikmirbre said: ↑

@zaroba ,,,,,,you still around? You make it home?
Click to expand...

Still sitting at MHC Kenworth in Oklahoma City. i40 exit 143

No luck getting a loan yet, my brother is able to get a small loan which will at least provide enough for a car to drive home next week. Truck might end up abandoned here, along with my loaded trailer, and my insurance expired on the 8th so no clue how that will play out when it comes to a cargo claim.

xsetra · Apr 16, 2023

How can I meet with you today?

nikmirbre · Apr 16, 2023

zaroba said: ↑

Still sitting at MHC Kenworth in Oklahoma City. i40 exit 143

No luck getting a loan yet, my brother is able to get a small loan which will at least provide enough for a car to drive home next week. Truck might end up abandoned here, along with my loaded trailer, and my insurance expired on the 8th so no clue how that will play out when it comes to a cargo claim.
Click to expand...

Unsolicited, Myself and @Opus volunteered to help you get home.....

Last Call · Apr 16, 2023

zaroba said: ↑

Still sitting at MHC Kenworth in Oklahoma City. i40 exit 143

No luck getting a loan yet, my brother is able to get a small loan which will at least provide enough for a car to drive home next week. Truck might end up abandoned here, along with my loaded trailer, and my insurance expired on the 8th so no clue how that will play out when it comes to a cargo claim.
Click to expand...

None of my business cause I don't know all the details of the load your under or if you can even legally do it but maybe if you start a thread explaining the situation your in maybe somebody can or has a idea on how someone can deliver the load your under so the shipper & the Receiver aren't on your butt and it doesn't sound like you need anymore financial liabilities.

zaroba · Apr 17, 2023

Ugh, my phone isn't showing me replies or notifications until hours/days after comments are made. Checked and refreshed the topic a few times sat and sun and saw no other posts since my last one until now.

Anyway, if anybody is passing through Oklahoma City and wants to look at the stuff, MHC Kenworth off i40 exit 143. Come into the drivers lounge at the service entrance and ask for Mike. Between 7am and 11pm I'll either be there or right outside the service entrance vaping.

Can feel free th DM me as well.

@nikmirbre I had posted my PayPal email in case you guys where being serious, but one of the mods deleted it.

Log in or Sign up

Forums

Find Trucking Jobs

Tons of tools and equipment

Dave_in_AZ Road Train Member

Trucking Jobs in 30 seconds

Wait, employers can't reach you!

Big Road Skateboard Road Train Member

Opus Road Train Member

lip zee Bobtail Member

nikmirbre Road Train Member

zaroba Heavy Load Member

xsetra Road Train Member

nikmirbre Road Train Member

Last Call Road Train Member

zaroba Heavy Load Member

Trucking Jobs in 30 seconds

Wait, employers can't reach you!

Log in or Sign up

Useful Searches

Find Trucking Jobs

Tons of tools and equipment

Dave_in_AZ Road Train Member

Wait, employers can't reach you!

Big Road Skateboard Road Train Member

Opus Road Train Member

lip zee Bobtail Member

nikmirbre Road Train Member

zaroba Heavy Load Member

xsetra Road Train Member

nikmirbre Road Train Member

Last Call Road Train Member

zaroba Heavy Load Member

Wait, employers can't reach you!