Truck purchase

Hello all I'm coming to you guys for some advice I'm looking to buy a used tractor now I asked for a ecm download and was sent a file what information should be in the file of the ecm download I have never seen on before so I'm curious the one I have tells me idle hours,speed settings,fuel consumption etc
Thanks stay safe

 

PETERBILT_________________________2013
VIN_______________________________1XPHDP9X4DD200957
ENGINE SN_________________________Y020912
SOFTWARE ID_______________________PC22_1201R08__*
COMPONENT ID______________________PCAR*MX
RATED ENGINE SPEED________________2200 rpm
TOTAL DISTANCE ECM________________578508 ml (931018 km)
TOTAL ENGINE HOURS________________14691 h
TOTAL IDLE HOURS__________________3008 h
TOTAL FUEL USED___________________119127 USgal (450944 L)
TOTAL IDLE FUEL USED______________2820 USgal (10674 L)
FUEL ECONOMY ECM__________________6.2 mpg (37.0 L/100km)
FUEL ECONOMY CALCULATED___________6.4 mpg (36.0 L/100km)
AVERAGE VEHICLE SPEED_____________49.5 mph (79.7 kmph)
ROAD SPEED LIMIT__________________64.5 mph (103.8 kmph)
CRUISE SPEED LIMIT________________64.5 mph (103.8 kmph)
MINIMUM CRUISE SPEED______________18.5 mph (29.8 kmph)
AVERAGE ENGINE LOAD_______________80 %
CHECK ENGINE______________________OFF
STOP ENGINE_______________________OFF
PROTECTION________________________OFF
MALFUNCTION_______________________OFF
***************************************************

ENGINE NO FAULT CODES
***************************************************

TRUCK ABS_________________________BNDWS*EC60-pre*
TRUCK ABS NO FAULT CODES
***************************************************

TRAILER ABS NO ANSWER
***************************************************

TRANSMISSION______________________EATON**
TRANSMISSION NO FAULT CODES
***************************************************

Note:
<A> - CODE ACTIVE, <I> - CODE INACTIVE, v - VECU or Cab Controller Code, s - SPN, P or U - OBDII Code.
Fault code description for information purposes only, NOT FOR REPAIRS.
For more detailed information please contact vehicle's manufacturer or its representative.


2020-10-08 11:32:21

 

This is what I was sent

 

Good thinking I was told it was a old farmers truck if that might make any difference

 

I was also looking for a ecm file on a truck from kw dude wanted 500$ to do it it's 2010 t660 with 659k for 17k

 

@Long FLD weigh in your input is valued