upgrading cobra 29 ltd classic

Discussion in 'CB Radio Forum' started by wannabnapete, Aug 19, 2010.

  1. Jolsen

    Jolsen Heavy Load Member

    Joined:
    Mar 6, 2010
    Messages:
    951
    Thanks Received:
    272
    Location:
    East of the big crick
    0
    most 29s get about 20watts when depending on what finals they put in them the day that one was made. now some techs such as randy at big O's in indy will replace the finals and get about 50watts out of one. Honestly if I were you I would go to walcott cb on the other side of I-80 from Iowa 80 and get this [​IMG]
    thus you can then run your own coax and get a really nice antenna without being limited to what fits in the factory slots.
     
  2. Powder Joints

    Powder Joints Subjective Prognosticator

    Joined:
    Sep 25, 2007
    Messages:
    7,663
    Thanks Received:
    7,744
    Location:
    Rosamond, SoCal
    0
    No its not magic, its called a peak meter, which is kind of a lie, not really but close to a lie. RMS wattage is standard, so to make it sound good they use a peak meter, these would be the same techs that do not know how to use a scope for setting your audio. Yes there are better transistors than the stock cobra, you can get rid of the choke and replace the limiter diode. You can also wipe out 40 channels in every direction.

    No matter how great you think your getting out all most are doing is interfering with conversations you can not hear. Get it tuned uo by a good shop, get all the clean audio you can. Clean is the key.
     
  3. FriedTater

    FriedTater Keeper of The Snakes

    Joined:
    Mar 25, 2009
    Messages:
    2,202
    Thanks Received:
    887
    Location:
    United State of Texas
    0
    Box that 29 up and ship it to Sparkys Cb
    Request the RFX Mod and a STDX nc/mic,do a Connex echo w/Talkback

    There will be no question of audio clarity either,they ROCK!

    YOU WILL BE HEARD!! :biggrin_25525:

    :biggrin_2559:
     
  4. FriedTater

    FriedTater Keeper of The Snakes

    Joined:
    Mar 25, 2009
    Messages:
    2,202
    Thanks Received:
    887
    Location:
    United State of Texas
    0
    This is not a good location to mount "any" antenna on those plastic
    trucks.

     
  5. DrDubbya

    DrDubbya Bobtail Member

    Joined:
    Jul 1, 2010
    Messages:
    32
    Thanks Received:
    2
    Location:
    Dallas, Tx
    0
    ^^And if THAT mount costs more than oh ten bucks, go to homedepot or tractor supply and buy the materials and make a better one yourself, cause that thing looks like a POS. Just my .02.
     
  6. Big_m

    Big_m Heavy Load Member

    Joined:
    Oct 13, 2009
    Messages:
    881
    Thanks Received:
    265
    Location:
    Central Maryland
    0
    That mount cost $39.95
     
  7. Chain Drive

    Chain Drive Medium Load Member

    Joined:
    Nov 28, 2008
    Messages:
    436
    Thanks Received:
    113
    Location:
    Nova Scotia,Canada
    0
    enough said
     
  8. wannabnapete

    wannabnapete Bobtail Member

    Joined:
    Jun 26, 2010
    Messages:
    7
    Thanks Received:
    1
    0
    well i got the cb peaked and tuned, different final in it. out of the box it was pretty poor only putting out 12 watts when the guy got done with it, it was sitting at 45. i have no issues with being heard and from a ways out, actually get compliments on how clear it is. now my only problem is my receive. just like a post above stated, i cant pick up on other conversations if they are a lil ways out there but they can hear me. whats next? a good antenna and coax? my swr on the factory cascadia is about 1.5.
     
  9. Mad Dog 20/20

    Mad Dog 20/20 Heavy Load Member

    Joined:
    Jan 31, 2010
    Messages:
    768
    Thanks Received:
    193
    Location:
    Skid Row
    0
    Your radio is only as good as the antenna, A $1000 radio will perform as good or bad as a $20 radio on a junk antenna.
     
  10. FriedTater

    FriedTater Keeper of The Snakes

    Joined:
    Mar 25, 2009
    Messages:
    2,202
    Thanks Received:
    887
    Location:
    United State of Texas
    0
    Get a Wilson 2K with the long stem,tune it and be done with it.
    Big Performance cost time and money and for a high percentage of drivers,a waste.