I changed my 2006 Kenworth throttle positioning sensor once they don't need to be calibrated, they are just mounted in that way.
W900 accel pedal conversion
Discussion in 'Kenworth Forum' started by Jeremyjdean92, Jun 17, 2019.
Page 2 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
The bump out looks pretty close to the top of the pedal. Will pedal covers fit?
I think the best looking/feeling pedals were those on the GMC Generals (and buses for that matter). -
My T660 pedal hurts my front ankle. I need to do this.
Vampire Thanks this. -
-
Did any of you guys manage to do this? What engine was in your trucks and what wires needed to be repinned?
Vampire Thanks this. -
Good luck with your install. If you’re too worried, you can try a local shop you trust to do the swap.Lysdexis Thanks this. -
After further digging it looks like the position sensor of the oem pedal assy is the same as the williams control sensor so I'll likely just find one similar to that number or a used oem pedal assy and put my sensor on it. Extending wires if necessary.Vampire Thanks this. -
Lysdexis Thanks this.
-
Vampire Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 3