Hey guy's
W900
year 2000
I have replaced my pin & bushing on my leaf spring hangers. It seems that my bushing was welded in on the left side - Should I weld this back in place with the wheel on the ground or should I have it jacked up with the pressure off it?
W900 Pin & Bush
Discussion in 'Ask An Owner Operator' started by skynnynlynnyrd, Feb 12, 2012.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Gong solely by your post as to what "welded in" means... no way. Fix the problem properly, don't weld in a new bushing. Somebody did a cheap crap "repair" somewhere along the way by the sound of it.
-
i wouldnt weld it ,it will just create more problems down the road
-
I wonder what type of rods you use for brass to steel.
-
Magic rods.... a new product from the fertile mind of Kevin Rutherford...
-
Thank you everyone
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.